Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across La Porte
Gate installation in La Porte means accounting for salt air, stormwater, and soil that shifts with every Gulf Coast rain. A gate that lasts 15 years in Pearland may look tired in five here if the post footings and hardware weren’t chosen with Galveston Bay in mind. Our Gate Installation team builds for this climate specifically: galvanized posts, stainless fixings, dielectric isolation where steel meets aluminum, and operator boards mounted high enough to stay dry when Fairmont Parkway-area yards hold water. We schedule installations around your family’s routine, and every job starts with a written price before we touch anything. Call (361) 256-5955 and a live person answers, day or night.
Why Latch and Post Gate Repair Houston Is La Porte’s Preferred Gate Installation Company
Since 2009, Latch and Post has worked as part of the Cedarwell family of independently owned gate specialists, and Cody Beckman leads the crew that serves Gate Installation in La Porte and the surrounding bay communities. La Porte homeowners tell us the same things after an install: the crew put down drop cloths before walking through the house to reach the backyard, the price on the invoice matched the written quote, and the gate swings clean without fighting the operator. Those details are just how we work.
Every technician who arrives at a La Porte home is background-checked and uniformed. Before work starts, you get a written price. Before the crew leaves, they photograph the cleanup and show you on request. If your kids are napping, we run tools at low speed. If your dog needs a gate that stays latched against a shoulder push, we check the latch release with the exact pressure a family pet might apply. And if anything about the installation isn’t right within 365 days, the Done Right Promise means we return and make it right without argument or fine print.
We know La Porte’s streets because we drive them weekly: the older ranches off Spencer Highway, the newer builds near Fairmont Parkway, the corner lots with double gates along Kirby and Underwood. That’s not trivia. Knowing where drainage backs up, which blocks get standing water after a hard rain, and how much road grit from industrial traffic ends up on your gate track changes where we place a control board and how we seal a post footing. A La Porte gate install is not a generic Houston install, and when it needs care, Gate Repair - La Porte should come from someone who knows the salt and the soil demand it.
Styles & brands we work with





Gate Installation Services in La Porte
Gate Installation Services in La Porte start with a conversation about what the gate actually needs to do: hold a dog, screen the driveway from the road, control who walks onto the property, or all three. We replace failed posts, hang new gate panels, build driveways and walk gates, and set operator mounts so the gate moves without straining the hinges. Most residential driveway gate installs in La Porte fall between $2,800 and $7,500 depending on gate width, material, and whether an operator is included at the same visit. You’ll see the exact figure in writing before anything begins.
Driveway and Double Gate Work
Driveway gates in La Porte need post footings that go deep enough to survive clay soil that swells and shrinks through the seasons. We set footings at four feet minimum for swing gates, with galvanized post bases and stainless anchor bolts. Double gates add a consideration: both leaves must meet evenly at center, or the latching side will sag within a year.

Walk Gate and Pedestrian Gate
Pedestrian gates take more daily cycles than any other gate on the property, especially in homes with kids going in and out to the backyard. A properly hung walk gate with stainless hinges and a latch that catches without slamming is a quality-of-life fix families notice immediately. We match existing hardware where we can, or replace it with marine-grade stainless when corrosion is already present.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in La Porte
Electric Gate Installation in La Porte requires more care than in inland neighborhoods, because the control board and operator are the parts most likely to fail in this coastal environment. We install operators from brands families actually own: LiftMaster, BFT, Linear, Viking, Ghost Controls, and more, and we choose sealed boards and elevated mounts wherever stormwater could pool. A full electric driveway gate installation in La Porte typically runs $4,200 to $9,800, including the gate, operator, safety edges, and photo eyes wired and tested to UL 325 standards. The written quote includes everything so there’s no surprise at the end of the day.
Operator Mounting and Sealed Boards
We mount control boards 18 inches above grade where possible, specifically because of what we see in low-lying La Porte neighborhoods after heavy rain. A board mounted at 8 or 10 inches is vulnerable when stormwater backs up in flat, clay-heavy yards. A sealed enclosure costs a little more but survives what a standard board won’t.
Safety Edges and Photo Eyes
Every automatic gate we install in La Porte includes the safety features that keep kids and pets protected: monitored photo eyes, reverse-on-contact edges, and audible warning where local conditions call for it. We test each safety function before we leave and show you how it works. The gate should stop and reverse if something touches the edge – we don’t leave until we’ve seen it happen.
Trusted Brands We Service in La Porte
Our technicians are factory-trained on the equipment La Porte homeowners already have on their property: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Where we stock parts for La Porte jobs, we do it with the coast in mind: sealed control boards, stainless hardware, and galvanized track pieces hold up better than the standard-issue parts most suppliers carry. We install Viking operators regularly on properties near the Ship Channel because their sealed boards handle humidity and salt exposure well. For existing Linear or BFT systems, we can source and install the specific compatible parts without swapping out a good operator unnecessarily.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in La Porte Homes
- Hinge posts leaning after salt-air corrosion. Steel gate frames and aluminum hardware don’t always play nicely together in La Porte, and the result is a hinge post that starts tilting enough to throw off the gate’s alignment. We reset footings with galvanized posts and stainless anchors so the lean doesn’t come back.
- Control boards shorting after heavy rain. Flat, clay-heavy soil in neighborhoods near Fairmont Parkway backs up stormwater, and a board mounted under 12 inches from the ground takes the hit. We remount sealed boards at 18 inches or higher and hard-wire them through moisture-protected conduit.
- Rack and pinion drives binding on slide gates. Salt-laden grit from Galveston Bay winds and truck traffic along Spencer Highway accelerates wear on gear teeth. La Porte slide gates benefit from sealed gearboxes and more frequent track cleaning than what works farther inland.
- Sagging gates at the latch side. Before assuming the panel is bent, we check the hinge post and hardware. On a 1970s rancher off Fairmont Parkway, our crew replaced a rusted hinge post on a custom ornamental iron swing gate, set a new 4-foot-deep post footing with stainless steel hardware, and upgraded the gate operator to a Viking model with a sealed board mounted 18 inches above grade. The gate has swung true since, and the operator hasn’t shorted in any storm.
Pricing for Gate Installation in La Porte, TX
Here’s what La Porte homeowners can expect to invest in a gate installation. A basic single walk gate install runs $900 to $2,400. A standard driveway swing gate, single leaf, typically lands between $2,800 and $5,500. Double driveway gates run $4,500 to $7,500. Adding an electric operator to any of those projects is usually another $1,800 to $4,200 depending on brand and configuration. An all-in electric driveway gate package with operator, safety edges, photo eyes, and sealed board installation sits between $4,200 and $9,800. The price you’ll pay is written down before we start, and it won’t change unless you ask us to add something mid-job. Call (361) 256-5955 for a free estimate at your La Porte home.
We Also Serve Cities Near La Porte
Our installations reach La Porte neighbors in La Porte, plus Webster, Galena Park, Houston, and Alvin. If you live near the bay or along the 146 corridor, the same written-price promise, the same cleanup routine, and the same 365-Day Done Right Promise apply to your gate.
Serving La Porte, TX - Our Local Coverage Area
We’re based in the La Porte area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in La Porte
La Porte’s flat, clay-heavy soil holds water longer than Pasadena’s, and many control boards are mounted too close to the ground. When stormwater backs up in low-lying areas off Fairmont Parkway, a board at 8 or 10 inches gets wet, and the circuit shorts. We mount sealed boards at 18 inches above grade and that prevents most rain-related failures. Call (361) 256-5955 and we’ll check your current board mount.
For properties within a mile or two of the Ship Channel, galvanized steel with a marine-grade powder coat is the practical choice. The combination of salt air from Galveston Bay and airborne chlorides from the Ship Channel makes galvanic corrosion a real problem, especially where steel touches aluminum. We specify dielectric isolation barriers at those contact points. It’s a small detail that’s rarely specified 10 miles inland in Deer Park, and it’s the difference between a gate that lasts 15 years and one that rusts through its mounting points in five.
Solar gate openers work in La Porte, but the panel and battery connections need sealing against humidity and salt exposure. We recommend sealed batteries and corrosion-resistant terminals, and we angle panels to shed standing water. For shaded lots or gates that cycle many times a day, a wired operator is often more reliable than solar. We’ll explain the trade-offs during the estimate.
Usually the panel is fine, and the hinge post has corroded at the base or worked loose in the footing. Salt air eats the original painted steel anchors faster than inland. We reset the post in a new 4-foot-deep footing with galvanized or stainless hardware, then realign the gate so the latch catches cleanly. Call (361) 256-5955 and we’ll inspect the post before recommending any replacement.
UL 325 applies to all automatic gate installations regardless of location, and it requires monitored safety devices: photo eyes that detect an obstruction, reverse-on-contact edges, and gate speeds limited to specific maximums. Near La Porte’s truck routes, where road vibration and blowing dust affect gate sensors, we test photo eyes and safety edges more rigorously and recommend sealed enclosures for the control board. Every install we complete in La Porte is tested to UL 325 before we leave.
When your La Porte gate needs to be installed, replaced, or upgraded to electric, call (361) 256-5955. A live person answers 24/7, the written price comes before any work begins, shoe covers and drop cloths are standard, and the 365-Day Done Right Promise backs everything we install.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving La Porte since 2009.