Driveway Gate in Houston, TX

Sliding driveway gates

Wrought iron

Wood & steel frame

Farm & ranch

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Driveway Gate in Houston, TX

A driveway gate in Houston does more than mark the edge of your property. It carries the daily load of our heat, our humidity, our gumbo clay soil, and the occasional tropical storm. At Latch and Post Gate Repair Houston, we install and repair driveway gates that stay square, swing true, and hold up to the way Houston actually lives. When a gate sags or a post shifts, it’s rarely the whole system failing. Usually, the latch has worn, the hinges have pulled, or the post has moved in the soil. That’s the work we do every day. Our technicians arrive in uniform, lay down drop cloths if the job touches inside the house, put on shoe covers before stepping through a doorway, and hand you a written price before any work begins. Call (361) 256-5955 any hour, day or night, and a live person picks up. If you’re planning a new gate, our Gate Installation in Houston page covers the full process from first measurement to final cleanup.

Key Takeaways

• Driveway gate repair in Houston typically runs $180 to $650 for most common fixes; full gate replacement usually lands between $1,800 and $6,500 depending on material and automation.
• Houston’s clay soil is the single biggest reason driveway gates go out of square here; post repair or reset is often the real fix, not the gate itself.
• Every job includes a written price before work starts, shoe covers, drop cloths, and a cleanup photo before we leave.
• The 365-Day Done Right Promise backs every repair and installation. If it isn’t right, we make it right.
• A live person answers our line at (361) 256-5955, 24 hours a day, 7 days a week.

When You Need Driveway Gate

Most Houston homeowners don’t notice a driveway gate slowly failing until something forces the issue. Maybe the gate drags a new groove into the concrete. Maybe the opener starts straining before the gate finally stops moving. These are the situations that send people to us, and they’re almost always cheaper to catch early than to let ride.

• The gate scrapes or drags at the latch side. Clay soil expands and contracts with every wet-dry cycle we get. A post that was dead plumb last spring can lean a quarter inch by August. Catching it now means resetting a post, not replacing a gate.
• The latch no longer lines up. In older subdivisions like Meyerland or Sharpstown, we see a lot of steel posts set in soil that’s moved for decades. The gate still swings, but the latch misses by half an inch. That gap lets pets out and invites the gate to swing in wind.
• The opener runs but the gate doesn’t move. Gears strip, belts stretch, and control boards cook in our July heat. If you have a LiftMaster or BFT operator that hums without moving the gate, the opener usually needs attention, not replacement.
• The gate is rusting at the hinge welds. Houston’s humidity is relentless on raw steel. Near Galveston Bay and the ship channel, salt air accelerates it. We see failed hinge welds on gates less than ten years old. A weld failure is dangerous because the gate can drop, so we treat it as a same-day priority.
• You’re building or buying and the old gate doesn’t meet City of Houston setback or pool-code requirements. Pool enclosure rules change, and older gates sometimes need a self-closing hinge or a specific latch height. We can verify and correct it without replacing the whole gate.
• The gate is loud, rough, or hard for a child to operate. If your kids can’t open it or the sound wakes the baby, the rollers or hinges have probably worn past the point of adjustment. We quiet it down and fix the travel so it moves with one hand.

Our Driveway Gate Process

We’re a gate company, not a general contractor, so our process is short, specific, and built around one thing: getting your driveway gate working right without leaving a mess behind. We also offer Gate Installation services when repair isn’t the right option. Here’s exactly what happens when you call us.

1. You call (361) 256-5955 and a person answers. Not a phone tree. We listen, ask what the gate is doing, and schedule a time that works for your household, including evenings and weekends. If a gate is stuck open with kids or pets in the yard, we treat it as an emergency and get there as fast as we can.
2. We inspect the full gate path. The technician walks the gate, checks the posts with a level, opens and closes it several times, and identifies what actually failed. We check the latch, hinges, post bases, wheels and track if it’s a slide gate, and the operator settings if it’s automated. You get an honest diagnosis, not a guess.
3. We hand you a written price. Before any work starts, you see the exact number in writing. No pressure. If you’d rather think it over, we’ll leave the quote and respect your decision. Most repairs are approved on the spot because the number matches what we described.
4. We fix it right the first visit. Our technicians are trained on LiftMaster, FAAC, BFT, and Linear equipment, so the part on the van fits your opener. We carry common latch types, hinge sets, wheels, and post materials. Family lives are busy; our goal is that you don’t have to schedule a second day off work.
5. We clean up and prove it. Drop cloths down where we worked, shoe covers on inside your home, and a photo of the finished, clean area before we leave. If the gate was loud and kids are napping, we use quiet tools and work with that in mind. We ask before moving anything in the yard or near the gate.
6. You get the 365-Day Done Right Promise. It applies to every part we install and every repair we make. If something isn’t right within the year, we come back and make it right. No argument, no fine print.

Driveway Gate Pricing in Houston

The cost of driveway gate work in Houston depends on three things: what failed, what the gate is made of, and whether the posts have moved. For a detailed breakdown, see our How Much Does Gate Installation Cost? (2026 Price Guide) - Houston, TX. Here are the ranges we quote most often in the Houston market.

• Latch replacement: $95 to $240, depending on the latch style and whether the post needs a striker plate fabricated.
• Hinge replacement or welding repair: $150 to $400 for most residential swing gates. Galvanized or powder-coated hinges run more than standard steel.
• Post reset or reinforcement: $350 to $900. Houston soil often requires digging past the clay lens and setting the post deeper with concrete and steel.
• Opener repair or board replacement: $180 to $650. A new control board for a LiftMaster or BFT opener usually falls between $250 and $450 with installation.
• Full gate replacement with standard steel or aluminum build: $1,800 to $6,500, depending on width, height, material, and whether automation is included.

Every one of these gets a written line-item price before we start. No estimate ranges after the fact, no “well, it turned out to be more than we thought.” The number you approve is the number you pay. Estimates are free. Call (361) 256-5955 and we’ll come out, walk the gate, and give you the exact figure in writing.

What Houston’s Climate and Soil Do to Driveway Gates

Houston isn’t one environment. We’re a city of gumbo clay along the bayous, sandy loam near the San Jacinto, and the permanently damp air of the Gulf coast. That matters for driveway gates in a way a national company’s call center never captures.

Clay soil is the big one. Houston’s expansive clays swell when wet and shrink when dry. A concrete post footing set two feet deep will heave and shift through a single year of wet springs and dry Augusts. That’s why gates in places like Bellaire, West University, and Pearland start binding at the latch even when the gate itself is fine. The post is moving, not the gate.

Humidity attacks metal. Even powder-coated steel gates rust at the weld points, hinges, and latch mechanisms in Houston’s 90% humidity. Galvanized hardware helps, but it needs to be the right grade. We use galvanized and stainless components where the budget allows, and we tell you when a cheaper part will fail in three years instead of twelve.

Storm season tests every swing gate. A 50-mile-per-hour gust against a solid wood privacy gate puts enormous torque on the hinges and the closer. We set wind-resistance into the hinge spacing and add positive stops so the gate doesn’t over-travel and tear the opener arm off. That’s a common storm-related failure we repair in Kingwood, Cypress, and Clear Lake after a big blow.

Why Families in Houston Call Latch and Post Gate Repair Instead of a Handyman

A general handyman can look at a gate. We do only gates, and we’ve done them under the Cedarwell family of independently owned and operated gate specialists since 2009. That narrow focus means our technicians have seen the exact failure your gate is having, usually dozens of times. They know the difference between a gate that needs a weld and one that needs a post reset. They know the controller settings on a BFT are different from a LiftMaster. They know Houston soil and Houston corrosion.

The distinction our customers notice most is how we leave the property. Our team follows the Cedarwell C.A.R.E. values on every job: Clean up like it is our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. That plays out in specific, visible ways. Shoe covers at the door. Drop cloths under the work area. A photo of the cleanup before we leave. Quiet tools when there’s a sleeping child. Pet-safe lubricants where there’s a choice. These aren’t add-ons or upsells. They’re how every Latch and Post job gets done, and they’re included without asking.

Every gate comes down to two parts, the latch that holds it and the post that carries it. That includes Pedestrian Gate systems as well as driveway gates. That’s the job we focus on. When you call us about a driveway gate in Houston, you get a technician who knows precisely what to check, a written price before work begins, and a guarantee that backs the work for a full year.

FAQs – Driveway Gate

How much does driveway gate repair cost in Houston?

Most driveway gate repairs in Houston run between $180 and $650. A simple latch replacement can cost as little as $95, while a post reset or opener board replacement lands at the higher end. You’ll receive a written price before any work begins, and estimates are free. Call (361) 256-5955 for an exact quote.

Is it cheaper to repair or replace a driveway gate?

For most Houston gates, repair is significantly cheaper than replacement. A worn latch, failed hinge, or drifted post costs a few hundred dollars to fix, while a full gate replacement runs $1,800 to $6,500. We’ll tell you honestly when a gate is too far gone to justify the repair, and we won’t push replacement if a repair will hold for years. Call us for a straight answer without the sales pressure.

Can you repair my driveway gate the same day?

Yes, in most cases we can complete a driveway gate repair on the first visit. Our technicians carry common latches, hinges, wheels, and control boards for LiftMaster, FAAC, BFT, and Linear openers. Emergency calls for a gate stuck open get priority, because a stuck-open driveway gate leaves pets, kids, and your home exposed.

What brands of driveway gate openers do you service?

We service and install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you’re not sure what brand controls your gate, bring a photo to the phone call and we’ll identify it. That photo often lets us bring the right part on the first trip.

Can you install a driveway gate on a new house in Houston?

Yes. We install driveway gates for new builds and renovations across the Houston area. The process includes measuring for the gate itself, setting posts correctly for Houston soil, and wiring any automation. See our full Gate Installation in Houston page for the complete process, then call (361) 256-5955 to schedule a free on-site measurement.

Call for a Free Driveway Gate Estimate in Houston

If your driveway gate is dragging, sagging, or stuck, call Latch and Post Gate Repair Houston at (361) 256-5955. We’ll answer live, schedule a visit around your family’s day, and hand you a written price before we pick up a tool. Our shoes stay covered, your floors stay clean, and the gate gets fixed right. From our home base in Houston, we serve the full metro area with the 365-Day Done Right Promise on every job.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston.