Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Greatwood, TX
Greatwood’s gates fail in predictable ways: rusted steel hardware near Oyster Creek, warped wooden panels after heavy rain, and sagging driveway gates on hinges the original builders installed without ever intending them to last 25 years. We work on all of it. Latch & Post Gate Repair handles gate repair, gate installation, and electric gate repair across Greatwood, with a written price before any work starts and a crew that treats your floors and driveway like our own. Call (361) 256-5955 any hour and a live person answers.
Why Greatwood Homes Are Different
Greatwood is a master-planned community, and that planning shows up in the gates. The HOA enforces covenants that require gates to match specific architectural styles and materials, so a simple hinge swap often turns into a compliance question. A homeowner can’t just bolt on whatever the hardware store sells. We keep retrofit hinges and rollers in the truck that Greatwood’s HOAs accept without a full architectural review, because many original gates were built with non-standard hardware by the initial builders and the supply chain for those parts dried up years ago.
The climate works against steel and wood alike. High humidity and frequent heavy rains accelerate rust on gate hardware, especially in the low-lying sections near Oyster Creek and the Brazos River. Wooden gates swell, stick, and then crack when they dry. The homes here are mostly 1990s and 2000s brick and stucco, which means the gates are hitting the age where original steel posts have corroded at the base and original wood panels have reached the end of their service life. A fix that holds up in Greatwood has to account for drainage, soil movement, and the HOA’s review process, not just the broken part.
Styles & brands we work with
Our Main Greatwood Services
Most calls we take in Greatwood fall into two groups: a gate that stopped latching or swinging, or an electric opener that quit responding. Both are covered below, and each service has its own detailed page for Greatwood.
Gate Repair in Greatwood
A sagging driveway gate or a latch that no longer catches is a repair we handle start to finish, including matching the finish and hardware style the HOA expects. Greatwood’s humidity means the failure is usually at the bottom: hinge pins corroded, post base rusted through, or the gate has dropped enough to drag. We lift, shim, replace the worn hardware, and leave the gate swinging square before we go. Gate Repair in Greatwood covers what we fix and what it costs.
Gate Installation in Greatwood
When a Greatwood gate is beyond repair or a homeowner wants a new driveway gate, the HOA rules shape the whole job. We build around the architectural style the covenant requires, with materials that hold up to the humidity and a plan for drainage so the posts won’t sit in water. We measure, quote a written price, and handle the whole installation from post holes to final swing. Gate Installation in Greatwood has the full details.
Electric Gate Repair in Greatwood
Electric gate openers in Greatwood see a lot of moisture, and the control boards, photo eyes, and limit switches are often the first things to act up. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. We diagnose before we replace, and we’ll show you the failed part before it comes off the gate. Electric Gate Repair in Greatwood walks through the diagnosis and repair process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Greatwood
Our technicians are factory-trained on the brands Greatwood families actually own: BFT, Linear, Viking, and Ghost Controls among them. We stock common replacement parts and retrofit hardware locally, so most repairs in Greatwood finish on the first visit. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Greatwood, TX
| Service | Typical range in Greatwood |
|---|---|
| Gate latch replacement | $120 – $250 |
| Hinge replacement (standard pair) | $180 – $400 |
| Steel gate post repair or replacement | $450 – $900 |
| Wood gate panel replacement (per panel) | $200 – $450 |
| Gate alignment and sag correction | $150 – $350 |
| Electric gate opener diagnosis | $90 – $180 |
| Control board replacement | $350 – $750 |
| Photo eye or safety sensor replacement | $150 – $300 |
| Full single driveway gate installation | $2,800 – $6,500 |
| Full double driveway gate installation | $5,500 – $12,000 |
HOA compliance work and custom fabrication push prices up in Greatwood, because matching an approved architectural style can mean custom steelwork rather than off-the-shelf panels. Whatever the job, you’ll see the exact number in writing before we touch anything, and that’s the number you pay.
Neighborhoods We Serve in Greatwood
We work throughout Greatwood, including the sections closest to the golf course and the low-lying streets near Oyster Creek, where drainage and soil movement affect gate posts more than elsewhere. Our typical scheduling window for Greatwood runs one to three days for non-emergency calls, and we can often arrive same day for a gate that won’t close or a driveway gate that’s stuck open.
- Canyon Gate at Greatwood
- Lakeview at Greatwood
- The Links at Greatwood
- Summerlin at Greatwood
- Woodbridge at Greatwood
Service Area – Cities Near Greatwood
Our Greatwood crews also cover the surrounding area. If you’re in Houston, TX, The Woodlands, TX, Sugar Land, TX, or Spring, TX, you can reach the same team and the same written-price promise on any gate job.
Serving Greatwood, TX - Our Local Coverage Area
We’re based in the Greatwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Greatwood
For a gate that won’t close or is stuck open, we can often reach Greatwood within a few hours. Non-emergency work typically schedules within one to three days. Every call is answered by a live person, day or night, so you’ll always get a real answer about timing.
It depends on the scope. Repairs that match the existing gate’s style and materials usually don’t need review. Replacement gates and new installations often do, and we can help you prepare what the HOA needs to see. We stock retrofits that many Greatwood HOAs accept without a full architectural review.
Everything: labor, parts, and the specific work we’ll do. The price you see before we start is the price you pay when the job is done. No trip charge surprises, no add-ons after the fact. If anything changes during the repair, we stop and get your approval in writing first.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greatwood Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs