Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Houston
Electric gate repair in Houston typically runs $185 to $620 depending on the part that failed, and most jobs are done the same day we diagnose the problem. We’re not a general handyman service. We work exclusively on gates: the operator, the control board, the keypad, the safety sensors, the hinges and posts that carry the weight. If your gate won’t open, won’t close, or only works when it wants to, call (361) 256-5955 and a live person answers, day or night.
Houston’s mix of clay soil, humidity, and builder-grade automation means certain failures show up here more than anywhere else. We know which ones. We know which HOAs in Kingwood run slide gates with loop detectors, which older Heights bungalows have custom swing gates on undersized footings, and which Cinco Ranch operators were wired wrong from the first day the house closed. That local knowledge is why homeowners across Houston call us instead of guessing.
Why Latch and Post Gate Repair Houston Is Houston’s Preferred Electric Gate Repair Company
We’re part of the Cedarwell family of independently owned gate specialists, operating in Houston since 2009. The team is led by Cody Beckman, and every technician who shows up at your door is background-checked, uniformed, and factory-trained on the brands Houston homes actually use: LiftMaster, FAAC, BFT, and Linear among them. We don’t send a trainee to figure it out on your gate.
What Houston homeowners tell us they value most is the on-site routine. Before we step inside your house or walk through your gate, we put on shoe covers and lay drop cloths where we’ll be working. We ask before moving anything, we keep tools quiet when kids are asleep, and we take a photo of the cleanup before we leave. That’s the Cedarwell C.A.R.E. standard: Clean up like it’s our own home, Ask before we touch anything, Respect your time and quiet hours, Explain the price before the work. Written price first, every visit, with no pressure. And the 365-Day Done Right Promise covers every repair: if it isn’t right, we make it right.
Styles & brands we work with
Gate Access Control in Houston
Gate access control in Houston means everything that lets the right people in and keeps the wrong people out: keypads, remotes, intercoms, vehicle loop detectors, and the control boards that tie them together. In a city with no zoning, the same crew might service a Kingwood HOA slide gate with loop detectors in the morning, a Fifth Ward industrial rack-and-pinion operator at noon, and a Heights bungalow’s swing gate in the afternoon. Each one has different entrapment-protection and access-control requirements, and we set them up accordingly.
Keypad and Remote Entry on Older Gates
Many Houston homes built in the 1980s and 1990s still run their original gate, and the keypad or remote is often the first thing to quit. We replace weather-sealed keypads, reprogram remotes, and when needed tie a new receiver into the existing operator so you don’t have to replace the whole system. A typical keypad replacement in Houston runs $145 to $260, and a new remote pair usually lands between $85 and $150.
Adding Access Control to a Manual Gate
A lot of Houston homeowners have a manual ornamental iron gate they’ve lived with for years. Adding a keypad and operator turns it into a real entry point without a full rebuild. The catch is the post footing. On Houston’s expansive clay, a post that held a manual gate fine for twenty years may shift within months once an operator adds torque. We check the footing before we mount anything, and the price you get in writing covers that assessment, not just the hardware.
Commercial Gate Operator in Houston
A commercial gate operator in Houston endures a harder life than most: daily cycles, heavy iron, storm surges, and clay soil that never quite holds still. We service slide, swing, and barrier operators at HOA entrances, industrial lots, and small commercial properties. When an operator at a master-planned community starts reversing mid-cycle or stopping for no reason, it’s rarely one big failure. It’s usually a stack of small ones: a rusted limit switch, a loop detector out of tune, a control board that took one surge too many.
Preventive Maintenance That Actually Prevents
Most commercial gate operator failures we see in Houston are the slow kind, not the sudden kind. A technician who checks torque, cleans contacts, and recalibrates limit switches twice a year stops most of them before they strand a resident or a delivery truck. We recommend a spring and fall service on Houston’s climate, right before storm season and right after the summer heat has done its worst. Service visits on commercial operators typically run $225 to $450 depending on operator type and access.
Surge Protection on Builder-Grade Operators
Houston’s summer thunderstorms are rough on electronics, and builder-grade operators rarely have the surge protection they need. We add whole-gate surge protectors at the post footing and recommend them on every commercial operator we service. It’s a small line item compared to replacing a fried control board, which on commercial equipment can run $600 to $1,100 before labor.
Trusted Brands We Service in Houston
We’re factory-trained on LiftMaster, FAAC, BFT, and Linear, and we stock common parts for these brands locally in Houston so we’re not waiting on a distributor when your gate is down. LiftMaster dominates residential and light commercial installs around Houston, FAAC shows up on a lot of hydraulic operators at older industrial sites, and BFT and Linear appear across HOA slide gates and newer residential builds. We know their failure points in this climate because we see them every week.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Houston Homes
- Operator trips its breaker after thunderstorms. The original install often skipped conduit and used undersized wire on long runs. In Houston’s humidity, the control board corrodes, and a summer surge finishes the job. We pull new THWN conductors in schedule 40 PVC and add surge protection at the post.
- Manual gate sags within months of adding automation. The post footing wasn’t designed for the added torque. On expansive clay, the hinge post shifts, the gate drags, and the operator burns out. We reset or rebuild the footing before remounting the operator.
- Keypad resets or loses codes after rain. Water intrusion at the keypad or the control board connection. We seal the enclosure, replace corroded terminals, and sometimes move the keypad wiring to a protected chase. A keypad replacement typically runs $145 to $260 in Houston.
- Slide gate reverses or stops mid-cycle at HOA entrances. Usually a loop detector out of tune or a limit switch that’s drifted. On a city where traffic stacks fast at a gate, that reversal is more than annoying. We recalibrate or replace the detector and confirm entrapment protection settings before we leave.
Pricing for Electric Gate Repair in Houston, TX
You’ll see the exact number in writing before we touch anything. That’s not a courtesy. It’s how we work. A typical service call plus diagnosis in Houston runs $85 to $145, and that’s credited toward the repair if you proceed. Keypad replacements land between $145 and $260. A new remote pair runs $85 to $150. Control board replacement on a residential operator usually falls between $300 and $620. Commercial operators sit higher, $600 to $1,100 for boards, because the equipment itself costs more. Every quote includes labor, parts, and the cleanup. No line item surprises. Estimates are free. Call (361) 256-5955 for an exact quote.
The same repair in Galena Park or Webster might run slightly less on labor because of shorter drive time, and Spring or La Porte sit about the same as Houston. We don’t pad Houston prices, but travel distance is a real cost, and we’re upfront about it.
We Also Serve Cities Near Houston
Our Houston crews cover the metro as far as Galena Park, Spring, La Porte, and Webster. If you’re just outside the city limits and your gate won’t budge, call us. We schedule by nearest technician, not by a queue. For the full picture of what we do, see our Electric Gate Repair page or read more about our work across Houston.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Houston
Because the original install usually skipped conduit and used undersized wire, and the control board has been corroding in Houston’s humidity ever since. A near-miss lightning strike or grid surge then finishes the board off. We replace the board, pull proper conductors in conduit where the run allows, and add a whole-gate surge protector at the post footing. Call (361) 256-5955 for a diagnosis; we’ll quote the board and surge protection in writing before any work.
Yes, and we do it routinely in the Heights, Montrose, and other inner-loop neighborhoods with older bungalows. The first thing we check is the post footing. Houston’s expansive clay shifts posts, and a gate that swung fine by hand for thirty years may sag within months once an operator adds torque. The written quote covers the footing assessment, the operator, the power run, and any hinge work. We don’t mount an operator on a post we don’t trust.
Most often it’s a loop detector out of tune or a limit switch that has drifted out of spec. In a city where traffic stacks at an HOA gate fast, a reversing slide gate creates a real bottleneck. We recalibrate the detector, reset the limit switches, and confirm the entrapment protection settings before we call the job done. Commercial operator service in Houston runs $225 to $450 per visit depending on the equipment.
Twice a year. Spring, before the summer heat and storm season, and fall, after both have done their damage. Houston’s humidity corrodes contacts and rusts hinges faster than a dry climate would, and the clay soil means posts and rails drift. Two visits a year catch most failures before they strand a resident or a delivery truck. Call (361) 256-5955 to schedule preventive service, and we’ll quote the annual cost in writing.
We size a solar panel and battery bank to your operator’s draw, mount the panel where Houston’s tree cover and roof lines won’t shade it, and run low-voltage wiring in conduit from the panel to the operator. In a city with frequent grid flickers, solar keeps the gate working through summer brownouts. We also specify a panel and battery that tolerate Houston’s heat, because cheap batteries cook in August. The conversion typically runs $1,200 to $2,800 depending on operator type and run length, quoted in writing before we start.
If your electric gate is acting up in Houston, call (361) 256-5955. A live person answers, we’ll talk through what you’re seeing, and we’ll get a technician out with a written quote before any work begins. No voicemail, no callback queue, no pressure.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston since 2009.