Ghost Controls Gate Repair Service Nationwide

Why Houston Homeowners Choose Ghost Controls Gate Repair

We provide independent Ghost Controls repair in Houston, TX, from the inner loop out to the master-planned communities of Katy, Sugar Land, and The Woodlands. Ghost Controls openers are solid machines, but Houston’s humidity, clay soil, and summer lightning do things to them that a generic gate company won’t catch on the first visit. We do. Our technicians work on AXVS, TDS2, SLX, and R Series systems every week, and we carry the boards, arms, and brackets these units actually need in this climate. We’re not affiliated with or authorized by Ghost Controls. We’re an independent service provider that knows the product line deeply, and you can reach a live person anytime at (361) 256-5955.

Call (361) 256-5955

Why Trust Latch and Post Gate Repair Houston for Your Ghost Controls Gate Repair?

Cody Beckman, our owner, spent the better part of a decade working on automated gate systems before bringing Latch and Post Gate Repair Houston into the Cedarwell family in 2009. He grew up in the San Fernando Valley, did his industrial mechanics coursework at Los Angeles Trade-Technical College, and has since read enough Ghost Controls boards and arms to know what a Houston summer does to them. A gate repair that closes right is one less thing to think about. That’s the standard we work to.

Our technicians are factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Ghost Controls specifically, that means we know the capacitor ratings on the AXVS control board, the limit switch bracket design on the TDS2, and the worm gear tolerances inside the SLX arm. We install genuine Ghost Controls replacement parts when longevity matters, and we offer quality aftermarket alternatives when a repair needs to fit a tighter budget. Either way, you get a written price before any work starts. No exceptions.

Common Ghost Controls Gate Repair Problems We Fix in Houston

Houston’s climate punishes gate operators in specific, predictable ways. These are the Ghost Controls failures we see most often on local properties.

• Capacitor degradation in the control board. On AXVS swing gate openers, Houston’s 95-degree afternoons plus lightning-induced power surges cook the electrolytic capacitors on the control board. The symptom is usually intermittent operation: the gate opens fine one morning, then refuses to respond the next. We replace the failed capacitors or the board itself, depending on damage, and we recommend surge protection on every Ghost Controls install we touch.
• Limit switch drift and corrosion. Ghost Controls TDS2 dual swing openers rely on limit switches to know where the gate stops. Houston’s humidity works its way into those switch housings and corrodes the contacts. The gate overtravels, bangs against the post, or stops short and won’t seal. We clean, recalibrate, or replace the switch assembly, then run the gate through full open-close cycles to confirm position accuracy.
• Worm gear wear from repeated manual releases. During hurricane season, power outages force homeowners to pull the manual release and push the gate by hand. On Ghost Controls SLX sliding gate arms, the worm gear inside takes the brunt of that. You’ll hear a grinding noise or notice the gate moving slower than it used to. We open the arm, inspect the gear teeth, and replace the worn components before the arm seizes entirely.
• Control board relay failure from power cycling. Frequent brownouts and grid flickers during storm season can kill the relays on a Ghost Controls board. The gate opens fine but won’t close, or it cycles open and closed on its own at random times. We test each relay individually and replace the board when multiple relays have welded or burned contacts.
• Remote and receiver range loss. The R Series remotes and receivers are reliable, but Houston’s dense brick construction and the sheer number of competing radio signals in some subdivisions cut the effective range. We check antenna placement, verify receiver sensitivity, and reprogram or replace remotes as needed. Sometimes the fix is as simple as relocating the receiver away from a metal gate frame that’s blocking the signal.

Ghost Controls Parts & Our Repair-vs-Replace Approach

We stock common Ghost Controls parts in our Houston service vehicles: control board capacitors, limit switch assemblies, remote transmitters, receiver modules, and worm gear sets for the SLX arm. That means many repairs happen same-day without waiting on a shipment. When we use genuine Ghost Controls parts, you’re getting components built to the manufacturer’s original tolerances. When we offer an aftermarket alternative, we explain exactly what the tradeoff is: sometimes the aftermarket bracket is actually stronger than the original, and sometimes an aftermarket board has a shorter expected life. We tell you which is which before you spend a dollar.

Our repair-vs-replace rule is simple. If a motor or board costs more than half the price of a new opener, we tell you honestly and show you the numbers. We don’t push replacement when a $40 capacitor swap fixes the problem. Call (361) 256-5955 and we’ll give you a straight answer, in writing, before any work begins.

Our Ghost Controls Service Process – Step by Step

Every Ghost Controls repair follows the same careful routine, whether it’s a motor replacement on an AXVS or a board swap on an SLX.

1. 1
   Diagnosis. We start by testing the gate through a full cycle and watching what it does. We check the control board for burned components, test the limit switches for continuity, and listen to the motor and gearbox. On Ghost Controls units, we pay close attention to capacitor condition and relay behavior, because those are the parts Houston’s heat and power grid punish most.
2. 2
   Written price. Before we touch a single component, you get a written estimate for the repair. This is standard on every visit, not an option. If you approve, we proceed. If you don’t, we leave. No pressure either way.
3. 3
   Repair or replacement. We install the parts we’d put on our own gate. Genuine Ghost Controls components when it matters most, quality aftermarket when it makes sense. We use surge protection on Houston installs as a matter of course, because it prevents the exact failures we see most often.
4. 4
   Testing and adjustment. We calibrate travel limits, force settings, and auto-close timing to match your specific gate and driveway. Then we cycle the gate ten times or more, including a battery backup test if you have one, to make sure it behaves consistently.
5. 5
   Cleanup and warranty. We lay drop cloths and wear shoe covers on every visit where we step inside. Before we leave, we take a photo of the cleanup and show it to you. Every Ghost Controls repair is covered by the 365-Day Done Right Promise: if it’s not right, we make it right. No argument, no fine print.

A while back, one of our techs responded to a Memorial-area home where a Ghost Controls AXVS swing gate would open only halfway and then reverse. The limit switch bracket had cracked from repeated heat expansion, so the controller had lost its position reference. We replaced the bracket with a reinforced aftermarket part, recalibrated the travel limits, and tested the gate through ten full cycles in 95-degree heat before we left. The family’s dog hasn’t found the gap since.

Ghost Controls Products We Service & Install in Houston

We service and install the full Ghost Controls residential lineup that Houston homeowners actually have on their properties.

• AXVS series – single and dual swing gate openers. Motor repair, board replacement, limit switch calibration, and full arm rebuilds.
• TDS2 series – dual swing gate openers for heavier gates. We handle synchronized travel, motor replacement, and bracket reinforcement.
• SLX series – sliding gate openers. Worm gear replacement, chain and track alignment, and board diagnostics.
• R Series – remotes, receivers, and keypads. Programming, range troubleshooting, and antenna repositioning.

We also handle motor repair, battery backup installation, and smart access upgrades on Ghost Controls systems, including retrofitting battery backup to existing openers so your gate works through the next hurricane-related outage.

We Also Service These Brands

Ghost Controls is a big part of our Houston work, but it’s not the only brand we see. We’re factory-trained on LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite as well. If you own a different brand and need service, the same written-price guarantee and 365-Day Done Right Promise applies.

FAQs – Ghost Controls Gate Repair Service in Houston

Book Your Ghost Controls Service in Houston, TX

If your Ghost Controls gate is acting up, call us at (361) 256-5955. A live person answers around the clock, nights, weekends, and holidays included. We’ll schedule a visit, give you a written price before any work starts, and treat your home the way we’d want ours treated. Cody Beckman and the Latch and Post Gate Repair Houston team are ready when you are.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston since 2009.