Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Alvin
A new driveway or pedestrian gate in Alvin typically costs between $1,400 and $4,800 depending on the gate’s width, material, and whether you’re adding an automatic opener. Most standard single swing gates run $1,600 to $2,800 installed, while double gates and sliding gates start closer to $2,400 and can reach $6,500 with automation. We serve Alvin homes from subdivisions east of Highway 35 to older properties near the historic center. Call (361) 256-5955 and you’ll get a live person, a straight conversation about what you need, and a written price before any work starts.
Why Latch and Post Gate Repair Houston Is Alvin’s Preferred Gate Installation Company
We focus on one thing: gates. Not fences, not general handyman work, just the latch that holds the gate and the post that carries it. That narrow focus shows in the details Alvin homeowners care about. Our technicians arrive in uniform, background-checked, and trained on the exact brands families in this area own: LiftMaster, FAAC, BFT, and Linear among them. We lay drop cloths on the floor and put on shoe covers before we step inside. And before we leave, we photograph the clean-up so you can see the space is as clean as we found it.
Alvin’s newer subdivisions on former coastal prairie land have a specific problem most gate companies never address. The expansive clay soil under those neighborhoods shrinks and swells with wet-dry cycles, pushing shallow-set posts toward the street within a few years. We dig footings deep enough to get below that active moisture zone. That’s the difference between a gate that works for a decade and one that jams after the next heavy rain.
Every installation we do in Alvin carries the 365-Day Done Right Promise. If something isn’t right, we make it right. No argument, no fine print. Cody Beckman and the team stand behind that promise on every single job.
Styles & brands we work with
Gate Opener Installation in Alvin
Gate opener installation in Alvin means mounting a motor, running power or solar, and wiring safety sensors on a gate that already exists or is being built. Most Alvin homeowners need this when they’re tired of getting out of the car in the rain, or when a new gate gets ordered without automation and they realize they want it after all. A typical gate opener installation here runs $1,100 to $2,600 depending on the opener type and whether we’re running new electrical or using solar.
What the job includes
We mount the operator, set the travel limits, install photo-eye sensors or edge sensors for entrapment protection, and test the full cycle a dozen times before we call it done. If we’re working with a LiftMaster swing operator, we also set the force limits carefully so the gate never pushes hard enough to hurt a kid or a pet.
Solar openers on Alvin properties
Many Alvin lots are large enough that running conduit from the house to the gate is a real project. A solar opener with a battery backup can be a cleaner option, and with our Gulf Coast sunlight, the panels charge well. We will always give you a written price for both options before you choose.
Gate Fabrication in Alvin
Gate fabrication in Alvin is the right call when you need a gate built to a specific width, height, or look rather than an off-the-shelf panel. We fabricate driveway gates, pedestrian gates, sliding gates, and double gates to fit the actual opening, not a standard size. A fabricated steel single swing gate in Alvin typically runs $1,800 to $3,400 before automation, while a wider double gate or custom sliding gate runs $3,000 to $6,500 depending on material and finish.
Built for coastal conditions
We specify galvanized steel frames and stainless steel fasteners for Alvin gates. Painted mild steel and standard zinc-plated hardware corrode here within five to seven years, especially at welds and hinge points. Galvanizing costs more up front, but it’s what actually holds up near the Gulf.
Sizing and clearance
Me angled driveway or a tight property line changes the gate’s geometry. We measure on site, account for the swing arc or slide track clearance, and fabricate the gate accordingly. You’ll see the fabrication drawing and the total price in writing before we cut any steel.
Trusted Brands We Service in Alvin
We’re factory-trained on LiftMaster, FAAC, BFT, and Linear equipment, which covers most of the openers installed in Alvin homes over the last fifteen years. When an Alvin customer needs a replacement board, a new remote, or a safety sensor for a FAAC slide operator, we typically have the part on our truck or can source it quickly. We don’t push one brand. We match the opener to your gate’s weight, how often it cycles, and whether you want app control or a simple keypad. Call (361) 256-5955 and we’ll talk through what makes sense for your property.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Alvin Homes
- Leaning posts in expansive clay. The Vertisol soils common across Alvin shrink and swell dramatically with rain and drought. Shallow footings set in that active zone lean toward the street within a few years, jamming swing gates and straining openers.
- Rust at welds and hinge points. Gulf Coast humidity and salt content in the air accelerate corrosion on painted steel and zinc-plated hardware. We’ve seen gate frames rust through at the bottom rail in under seven years when the wrong materials were used.
- Opener control boards dying from moisture. Automatic gate operators without properly sealed enclosures let humidity into the electronics. The board corrodes and the gate stops responding to remotes, usually at the worst time.
- Missing entrapment protection. Older installations often lack photo-eyes or edge sensors. Beyond the safety concern, a gate without entrapment protection can be a liability and will fail a professional inspection.
Pricing for Gate Installation in Alvin, TX
Here are honest numbers for the Alvin market. A basic single swing gate, fabricated and installed, runs $1,600 to $2,800. A double driveway gate runs $2,800 to $5,200. A sliding gate with automation starts around $3,200 and can reach $6,500 for a wider opening. Gate opener installation alone runs $1,100 to $2,600. The variables are the gate’s width and weight, whether the posts need to be re-set in deeper footings, and the finish you choose. You will get a written price before we start, and the price we quote is the price you pay. Estimates are free. Call (361) 256-5955.
We Also Serve Cities Near Alvin
Our gate installation team regularly works in Webster, La Porte, Galena Park, and Sugar Land. If you’re in any of those communities and want the same Gate Installation in Alvin quality and C.A.R.E. standards, we can schedule a free measure and provide a written price. You can also learn more about our full Gate Installation services.
Serving Alvin, TX - Our Local Coverage Area
We’re based in the Alvin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Alvin
Gate post footings in Alvin should extend 30 to 36 inches below grade to get below the active moisture zone in the expansive clay. Shallower footings sit in soil that swells and shrinks with every wet-dry cycle, and that movement is what pushes posts toward the street over time. For heavy driveway gates we sometimes use helical piers for extra stability. Call (361) 256-5955 for a free evaluation of your existing posts.
Choose galvanized steel with stainless steel fasteners and hinges. Painted mild steel with standard zinc-plated hardware will rust through at welds and hinge points within five to seven years in Alvin’s humidity. A powder-coated finish over galvanized metal gives you both looks and longevity. We’ll spec the right materials on your written quote.
Yes. Gate opener control boards need a properly sealed, weather-tight enclosure, and the wire connections should have dielectric grease or sealed connectors. Alvin’s humidity shortens the life of exposed electronics. We also recommend battery backup on automatic gates so you can still open the gate after a storm knocks out power.
Yes, and solar is often a great choice for Alvin properties where running electrical from the house to the gate would mean a long conduit run. The panels charge well in our Gulf Coast sunlight. We’ll size the panel and battery for your opener’s draw and tell you the full cost in writing before any work begins.
The hinges usually aren’t the problem. The post has likely shifted in the expansive clay after prolonged rain. Alvin’s soil swells when wet and shrinks when dry, and if the post footing is too shallow, the whole post moves and the gate sags. We fix it by digging the post out, setting it 30 to 36 inches deep in concrete, and using stainless anchor bolts. Call (361) 256-5955 and we’ll tell you exactly what your gate needs.
We installed a LiftMaster swing gate operator on a driveway gate off Highway 35 in a newer Alvin subdivision. The original hinge post had leaned toward the street after a heavy rain cycle, so we excavated the post footing to 36 inches, set it in concrete with stainless steel anchor bolts, and fitted new galvanized hinges before mounting the operator. We also added safety photocells and a loop detector. That gate has held alignment through two wet seasons.
If you need a gate installed, fabricated, or automated in Alvin, call (361) 256-5955. You’ll get a live person, a free estimate, and a written price before any work starts. We’ll protect your floors, respect your time, and stand behind everything we install.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Alvin and surrounding communities since 2009.