Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with





See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Houston?
Gate repair in Houston typically costs between $175 and $650 for most common fixes in 2026, with straightforward jobs like latch replacement or hinge adjustment landing in the $175 – $325 range. Electric gate repairs run higher, usually $400 to $1,800, because they involve circuit boards, motors, or sensors. The final number depends on your gate’s type, the part that failed, and whether the problem is mechanical or electrical.
At Latch and Post Gate Repair Houston, we give you a written price before any work begins, so you always know the exact number before a technician touches your gate. If you want a straight answer for your specific situation, call (361) 256-5955 and a live person will walk you through what to expect.
Key Takeaways: Gate Repair Costs in Houston
- Most mechanical gate repairs in Houston run $175 – $650
- Electric gate repairs typically cost $400 – $1,800
- Latch replacement is the most common fix, usually $125 – $325
- Houston’s humidity and clay soil drive specific failure patterns, especially with wooden posts and circuit boards
- Repair is almost always cheaper than full gate replacement when the damage is caught early
- Latch and Post Gate Repair Houston provides a written price before work starts, every visit, no exceptions
Gate Repair Cost Breakdown (2026)
Here’s what Houston homeowners actually pay for the most common gate repairs this year. These ranges reflect what we see across neighborhoods like Meyerland, Katy, The Woodlands, Pearland, Sugar Land, and the Heights, including parts and labor.
| Repair Type | Typical Cost Range (Houston, 2026) |
|---|---|
| Gate latch or lock replacement | $125 – $325 |
| Hinge replacement (pair) | $150 – $400 |
| Sagging gate correction | $175 – $450 |
| Gate wheel or roller replacement | $120 – $300 |
| Gate post stabilization or re-setting | $250 – $700 |
| Electric gate circuit board repair | $400 – $1,200 |
| Gate opener motor replacement | $500 – $1,500 |
| Safety sensor alignment or replacement | $150 – $425 |
| Full service call (diagnostic + minor adjustment) | $125 – $250 |
Those numbers are for typical single-swing and sliding gates. If you have a custom iron gate in a neighborhood like River Oaks or Memorial, expect parts to cost more because the hardware is often custom-fabricated. A standard latch replacement from a big-box store runs about $20 to $60 in parts, but the labor to align it properly on a gate that’s shifted over years of Houston heat and humidity is where the real cost sits.
What Drives Cost Up or Down
The biggest variables are the gate’s material, whether it’s automated, and how long the underlying issue has been ignored. A gate that’s been dragging on the ground for six months causes cascading damage: hinge plates loosen, the post leans, and eventually the frame itself warps. A $200 fix becomes a $700 post reset. Conversely, a gate that still closes but just needs a new latch and minor hinge tightening usually stays under $300.
Electric gates are a different structure. When a LiftMaster or FAAC opener stops responding, the problem could be a $150 sensor, a $500 control board, or a $1,200 motor. Good diagnostics matter here, and that’s why we send factory-trained technicians who know these specific brands rather than someone who’s going to guess and start swapping parts at your expense.
What Affects Gate Repair Pricing in Houston
- Clay soil movement. Houston sits on expansive clay that shifts with rainfall and drought. Gate posts set in clay-heavy soil, especially in neighborhoods like Cypress and Katy, shift out of alignment over time. This affects hinges, latches, and even electric gate sensors that rely on precise alignment.
- Humidity and hardware corrosion. Houston’s humidity is relentless year-round. Steel hinges, latch plates, and even circuit-board connections corrode faster here than they do in drier markets. A galvanized hinge lasts 5 – 7 years in Houston’s climate where it might last 12 in Austin.
- Gate type and weight. A lightweight aluminum pool gate in Sugar Land costs less to repair than a heavy custom wrought-iron driveway gate in Memorial. Weight puts strain on hinges, posts, and opener motors alike, and heavier gates wear parts faster.
- Manual versus electric. Manual gates have fewer failure points, so repairs are simpler and cheaper. Electric gates add motors, control boards, remote receivers, photo-eye sensors, and sometimes keypads or intercom systems. Every additional component is another potential failure point.
- How long the problem has been ignored. A gate that drags slightly but still latches is a quick fix. A gate that’s been scraping for eight months has usually bent the hinge plates, pulled the post, and cracked the frame where the hinges mount. The repair bill reflects that accumulated damage.
- Access and site conditions. Some Houston gates sit behind shrubs, on sloped driveways, or next to fences that limit working space. A technician who has to dig out a post next to a sprinkler line in The Woodlands is doing different work than one replacing a latch on a clear driveway in Pearland.
We see these patterns every day. In Meyerland, where lots are large and gates tend to be wide and heavy, post re-setting is the most common call we get after heavy rain. In townhome communities inside the Beltway, electric gate sensor alignment is the recurring issue because gates get used dozens of times per day.
How Much Does a Gate Latch Replacement Cost in Houston?
A gate latch replacement in Houston typically costs $125 to $325, including parts and labor. The latch itself is usually a $20 to $60 part, but the work involves aligning the latch plate to the gate’s current position, which shifts over time as Houston’s clay soil moves posts and gate frames settle. If the post has moved significantly, the technician may need to reposition the latch plate or add a spacer, which adds labor time but keeps the total under $325 in most cases.
Every gate comes down to two parts: the latch that holds it and the post that carries it. That’s the job we focus on. Call (361) 256-5955 for an exact quote on your latch, with the number in writing before any work starts.
How Much Does an Electric Gate Repair Cost in Houston?
Electric gate repair in Houston runs $400 to $1,800 depending on the component that failed. Simple fixes like a sensor realignment or a remote receiver replacement run $150 to $425. Motor replacement on a LiftMaster, FAAC, or Viking opener typically runs $500 to $1,500. Full control-board replacement on a DoorKing or Elite system can reach $1,800 when the board is proprietary and has to be ordered from the manufacturer.
One thing that surprises Houston homeowners is how often the fix is a $40 capacitor or a misaligned photo-eye rather than a dead motor. That’s why diagnostics matter. Our technicians are factory-trained on the brands families actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The right diagnosis on the first visit keeps the bill honest.
If your electric gate is misbehaving, call (361) 256-5955 and describe what it’s doing. A live person answers around the clock, and we’ll tell you whether it sounds like a quick fix or something that needs a service visit.
Is It Cheaper to Repair or Replace a Gate?
Repair is cheaper than replacement in about 85% of cases. A full gate replacement in Houston runs $1,800 to $6,000 for a typical driveway gate, depending on material, size, and whether it includes automation. Most repairs stay under $650 for manual gates and under $1,800 for electric ones, so repair wins on price unless the structure is truly failing.
The decision really comes down to three questions: Is the post still sound? Is the gate frame structurally intact? Is the opener (if there is one) worth saving? If the post is rotted at ground level or the frame is rusted through, replacement is the honest answer. We’ll tell you which one you’re looking at, with numbers for both options, before you commit to anything.
For a recommendation on your specific gate, call (361) 256-5955. We’ll give you a repair number and a replacement number side by side so you can decide with real information.
Common Gate Repairs We See Across Houston
1. Latch Misalignment
This is the most common call we get in every part of Houston. Over time, gates settle, posts lean slightly, and the latch no longer lines up with the strike plate. In neighborhoods with shifting clay soil, like Katy and Cypress, this happens faster. Fixing it usually takes 30 to 60 minutes and runs $125 to $325.
2. Sagging Gate
When hinges wear or the post leans, the gate’s outside edge drops and starts dragging on the driveway. Left alone, the frame bends and the fix gets more expensive. We see this frequently on wide driveway gates in Sugar Land and Pearland. Correcting a sagging gate runs $175 to $450 if the post is still solid.
3. Dead Electric Gate Opener
Humidity gets into control boards. Power surges from Houston thunderstorms take out capacitors. Capacitor failure is so common after summer storms that we stock the common ones on our trucks. Motor or board replacement costs $400 to $1,500 depending on the brand and part.
4. Sensor or Photo-Eye Issues
Electric gates are required to have safety sensors that stop the gate if anything, or anyone, is in the path. When these go out of alignment or fail, the gate won’t close, which is actually a sign the safety system is working. Realignment is a quick $150 to $250 fix. Replacement runs up to $425 with parts.
5. Rotted Wooden Post
Wooden gates and posts suffer in Houston’s humidity, especially when they’re set in clay soil that holds moisture against the wood. A rotted post means the entire gate must be un-hung, the post dug out, and a new post set in concrete. This runs $250 to $700 depending on post size and access.
How We Work: The Cedarwell Care Promise
Most gate companies show up, fix the gate, and leave. That’s the bare minimum, and it’s not how we operate. Latch and Post Gate Repair is part of the Cedarwell family of independently owned and operated gate specialists, and every technician works to the Cedarwell C.A.R.E. values on every single visit.
Here’s what that looks like when we come to your home:
- Written price before work starts. Not an estimate over the phone and then a surprise on the invoice. A written number, every visit, before we touch anything.
- Shoe covers and drop cloths. We lay drop cloths on the floor and put on shoe covers before we step inside, so your floors stay clean. This matters with kids and pets in the house.
- Cleanup photo before we leave. We take a photo of the work area after cleaning up, so you can see what we left behind even if you’re not home.
- Quiet tools when it matters. We can schedule around nap time if quiet matters, and we use pet-safe lubricants where there’s a choice.
- Ask before we move or touch anything. A technician who knocks before touching anything, explains what they found, and explains the price. Calm, careful, specific.
That’s the way home service should work in Houston, and it’s the reason families call us back when the next gate issue shows up.
The 365-Day Done Right Promise
Every repair and installation we do is backed by the 365-Day Done Right Promise. If the repair or installation isn’t right, Latch and Post makes it right. No argument, no fine print. A full year of coverage on every gate repair, every installation, every electric gate fix.
Most gate companies in Houston offer 30 or 90 days if they offer anything. We stand behind our work for a full year because Cody Beckman, who leads Latch and Post, builds the company around a simple idea: do the job right the first time, and if something goes wrong anyway, fix it without making the homeowner fight for it.
Houston Neighborhoods We Serve
Our technicians work throughout the Houston metro area, from inside the Beltway to the surrounding suburbs:
- The Heights, Montrose, and Midtown, where wooden gates on older homes need hinge and post work
- Memorial, River Oaks, and West University, where custom iron gates need careful, brand-specific electric repairs
- Katy, Cypress, and Tomball, where clay soil movement keeps post re-setting on the schedule
- Sugar Land, Pearland, and Missouri City, where wide driveway gates and electric openers are the norm
- The Woodlands and Spring, where humidity is a constant factor in control board and sensor failures
- Clear Lake, League City, and Friendswood, where salt air adds another layer of corrosion pressure on metal hardware
If you’re anywhere in the Houston metro, call (361) 256-5955 and we’ll get you on the schedule. A live person answers 24 hours a day, 7 days a week, including nights, weekends, and holidays.
How to Save on Gate Repair in Houston
Saving money on gate repair isn’t about finding the cheapest technician. It’s about catching problems early, maintaining what you have, and choosing the right repair instead of the wrong replacement.
1. Act When You First Notice a Change
A gate that starts dragging, a latch that needs a shove to engage, or an opener that hesitates are all early warning signs. Fixing a dragging gate costs $175 to $450. Waiting until the post leans and the frame bends turns that into a $700 post reset or a full replacement. Houston’s humidity and clay soil mean these problems accelerate, so the time window is shorter than you’d think.
2. Get a Diagnostic, Not a Guess
A technician who throws parts at an electric gate problem can waste hundreds of dollars. Our factory-trained technicians diagnose the exact component that failed before replacing anything. When the fix is a $40 capacitor rather than a $900 motor, you want someone who can tell the difference on the first visit.
3. Compare Repair vs. Replacement with Real Numbers
We’ll give you both numbers in writing. If repair makes sense, you’ll know exactly what it costs. If replacement makes sense, you’ll know that too, and you won’t wonder if you overpaid for a patch job.
4. Keep the Post Sound
The post carries everything. In Houston’s clay soil, posts shift and lean, and that cascades into every other problem. If your post is still solid, repairs stay cheap. If it’s leaning or softening, address it early with a post stabilization fix rather than waiting for it to fail completely.
5. Use a Free Estimate
Latch and Post Gate Repair Houston offers free estimates on repair work. Call (361) 256-5955, describe what’s happening with your gate, and we’ll give you a realistic range over the phone. Then we’ll come out and give you the exact written price before any work starts.
FAQs – Gate Repair Cost in Houston
How much does a gate repair cost in Houston on average?
The average gate repair in Houston costs $175 to $650 for manual gate issues and $400 to $1,800 for electric gate repairs. Most homeowners pay between $250 and $500 for the typical mechanical fix.
Can you fix a gate the same day in Houston?
In most cases, yes. Standard latch, hinge, and sensor repairs are completed in a single visit. We keep common parts for LiftMaster, FAAC, Mighty Mule, and other major brands on our trucks so the fix happens on the first trip. For an immediate answer, call (361) 256-5955 and we’ll tell you over the phone whether your issue is a same-day fix.
Is it cheaper to repair or replace a gate?
Repair is cheaper in roughly 85% of cases. Gate repair runs $175 to $650 for most mechanical issues while full replacement starts around $1,800 and can reach $6,000 for custom driveway gates. Replacement makes sense only when the post is rotted, the frame is rusted through, or the gate has already been patched multiple times.
How much does an electric gate opener replacement cost in Houston?
Electric gate opener replacement in Houston runs $500 to $1,500, including the motor, labor, and any necessary adjustments. Circuit board replacement is slightly less expensive at $400 to $1,200. If the issue is a sensor or capacitor, the fix is often under $250.
Does Latch and Post charge a service fee for gate repair estimates in Houston?
No. Estimates are free. You’ll get a written price before any work begins, and if you decide not to proceed, you’ll still have a clear picture of what the repair involves and what it should cost. Call (361) 256-5955 to schedule.
What gate brands can Latch and Post repair?
We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. These are the brands families in Houston actually own, and we carry common parts on our trucks so the fix happens on the first visit, not the third.
Do you offer any warranty on gate repairs in Houston?
Yes. Every repair and installation is covered by the 365-Day Done Right Promise. If the repair isn’t right, Latch and Post makes it right. No argument, no fine print. A full year of coverage.
What to Expect When You Call Latch and Post Gate Repair Houston
Here’s how it works, step by step:
- You call (361) 256-5955. A live person answers immediately, no voicemail, no callback queue, no matter what time it is. You’ll describe what’s happening with your gate.
- We schedule a visit that fits your life. Morning, afternoon, evening, or weekend. If you have a sleeping kid or a nervous dog, we’ll work around that.
- A background-checked, uniformed technician arrives. He knocks first. He puts on shoe covers before stepping inside. He lays drop cloths where the work happens.
- You get a written price before any work begins. The exact number, on paper, before we touch your gate. If you want to think about it, that’s fine, no pressure.
- The repair is done right. Factory-trained, calm, careful work. Quiet tools if it matters.
- Cleanup happens, with proof. We take a photo of the clean work area and show you before we leave. Your floors stay clean, your gate works, and you have the numbers to prove it.
For a full look at everything we do, visit our Gate Repair in Houston page. It covers the range of repairs, the brands we service, and what makes Latch and Post different from every other gate company in the Houston market.
Call Now for a Free Gate Repair Estimate in Houston
If your gate is dragging, sagging, refusing to open, or just starting to act up, don’t wait until a $200 latch fix becomes a $1,500 opener replacement. Call (361) 256-5955 now. A live person answers around the clock, we’ll give you a realistic range on the spot, and we’ll schedule a visit that gets the exact written price in your hand before any work starts.
Latch and Post Gate Repair Houston, part of the Cedarwell family, has been serving Houston-area homeowners since 2009. Led by Cody Beckman, our focus is simple: the latch that holds the gate and the post that carries it. Done right, done clean, at a price you knew about before the work began. Call (361) 256-5955 for your free estimate.
Pricing reflects the Houston market as of 2026. Latch and Post Gate Repair Houston offers free estimates – call (361) 256-5955.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston since 2009.
What Our Customers Say
"Gate motor died and they replaced it carefully, cleaning every bit of debris off the driveway. Mindful not to leave the yard open with our dog out. Great crew."
- Benson Ide"New hinges welded on a heavy gate. They laid down protection so no sparks hit the driveway and cleaned every bit after. Respectful of the property and the result is solid."
- Derek Pulanco"Our gate opener quit and they came out quick. The tech was careful not to leave the yard open while our dog was out, which I really appreciated. Clean work, swept up the metal shavings."
- Eleanor Boggs