Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Houston
Gate repair in Houston, TX usually means one of three things: a board fried by a Gulf thunderstorm, a hinge post shifted by clay soil, or rust that has quietly eaten through an iron frame. Most repairs run between $180 and $2,400 depending on what failed, and we quote the exact number in writing before any work begins. Our Houston crews know the difference between a 1980s HOA slide gate in Clear Lake and a custom ornamental swing gate in Montrose, because they have worked on both in the same day. Call (361) 256-5955 and a live person answers, any hour.
Why Latch and Post Gate Repair Houston Is Houston’s Preferred Gate Repair Company
Latch and Post Gate Repair has been part of the Cedarwell family since 2009, and the Houston office works on gates that other companies will not touch. We are not a general handyman service. Every technician is background-checked, uniformed, and factory-trained on LiftMaster, FAAC, BFT, and Linear equipment, which covers the operators on most Houston driveway and community gates.
Houston homeowners keep calling us back because of how we treat the house, not just the gate. We put on shoe covers before stepping inside the garage or utility room. We lay drop cloths wherever the work carries us through the home. You get a photo of the clean-up before the technician leaves. That is the Cedarwell Care Promise, and it is included on every visit, no upsell and no negotiation.
When you call (361) 256-5955, a live person answers. No voicemail queue at 2 a.m. when your gate is stuck half-open and your dog is deciding whether to explore the neighborhood. We schedule around your day when we can, and we carry common LiftMaster and FAAC boards on the truck so many Houston repairs finish on the first visit.
Styles & brands we work with
Commercial Gate Repair in Houston
Commercial Gate Repair in Houston is shaped by the city’s lack of zoning, which means a single crew might service a 1970s HOA slide gate, a 1980s iron driveway gate in Montrose, and a 30-foot industrial cantilever gate within the same square mile. Each one demands a different operator approach and a different corrosion strategy. A cantilever gate on a truck yard off Clinton Drive needs roller trucks and rack cleaned of grit and rust scale. An HOA slide gate in Kingwood needs its safety loops tested and its operator board checked for surge damage. A restaurant dumpster gate on Washington Avenue needs quiet, reliable open cycles so the neighbors do not complain.
Surge Protection for Operators
Houston thunderstorms do not politely announce themselves, and a lightning strike a half-mile away can send enough voltage through the grid to kill a commercial operator board. We install surge-protected power supplies and test the grounding on commercial gates across Houston. The extra protection costs a fraction of replacing a fried board after the storm.
Access Control Integration
Commercial properties in Houston often run a mix of keypads, phone-entry systems, and vehicle detection loops. We service the gate operator and tie it back to the existing access control so the whole system works together. Typical commercial gate repair in Houston runs $400 to $2,400, depending on operator type and parts.
Iron Gate Repair in Houston
Iron Gate Repair in Houston is as much about the post and the hinge as it is about the iron itself. Houston’s clay soil expands after heavy rain and contracts during dry stretches, which slowly pushes gate posts out of alignment. A wrought iron gate that swung fine in March drags across the driveway by June. We correct the post, repair the hinge, and rust-proof the frame so the gate swings true again.
Weld and Rust Restoration
Houston humidity never really lets up, and 30-year-old ornamental iron often has rust inside the lower rails and around the hinge barrels. We grind back the rust, repair or replace the weakened sections, and repaint with a rust-inhibiting primer. Most ornamental iron gate repairs in Houston run $350 to $1,800, depending on how much fabrication is required.
Custom Gate Realignment
In neighborhoods like Boulevard Oaks and the Heights, the driveway gates are often custom-built and heavy. Realigning one requires patience, not just a wrench. We reset the hinge post in fresh concrete where needed, shim the gate to its original reveal, and adjust the closer so it settles soft instead of slamming. You will see the price in writing before we touch anything.
Trusted Brands We Service in Houston
Most Houston gates run on LiftMaster, FAAC, BFT, or Linear operators, and our technicians are factory-trained on all four. We keep common control boards, safety photocells, and receiver kits stocked in the Houston office so we are not waiting on a shipment from Dallas when your gate will not open. If you have a Mighty Mule on a backyard gate or a Viking on a commercial slide, we service those too. The right fix on the first visit is the whole point of being a gate specialist rather than a generalist.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Houston Homes
- Clay soil shifting hinge posts. After heavy rain, Houston clay expands and pushes posts out of plumb, so ornate gates drag and bind. We reset the post in a fresh concrete footing and realign the gate to its original arc.
- Power surges from Gulf thunderstorms. A summer storm can fry an operator control board and strand a swing gate half-open. We install surge-protected operators and test grounding on every repair visit.
- Humidity corrosion on iron frames. Houston’s subtropical moisture rusts iron frames and rack-and-pinion teeth, which makes slide gates jerk instead of glide. We wire-brush, treat, and repaint vulnerable sections.
- Aging operators from the 1980s and 1990s. Many Houston subdivisions still run their original ornamental iron gates and operators. We stock parts for older LiftMaster and FAAC units, and when replacement is smarter than repair, we say so plainly.
One recent call took our techs to a 1990s custom ornamental swing gate in Tanglewood. A summer thunderstorm surge had fried the FAAC operator’s control board. We installed a new surge-protected operator with safety photocells, dug out the old hinge post footing, poured fresh concrete to correct years of clay-soil shifting, and keyed the existing keypad entry into the new board. That gate has cycled silently through three storms since. We name the tools and the parts because you deserve to know what you are paying for.
Pricing for Gate Repair in Houston, TX
What you pay depends on what actually failed, and we would rather give you a real number than a vague range. A standard iron gate realignment in Houston runs $180 to $450. Replacing a worn hinge or latch bracket runs $150 to $400. Commercial operator board replacement runs $400 to $1,400 installed, while a full surge-protected swing operator with safety photocells on a custom gate runs $1,200 to $2,400. Rust repair and weld work on ornamental iron typically lands between $350 and $1,800. Every quote is written, itemized, and agreed to before we touch anything. Call (361) 256-5955 for a free estimate.
For a deeper look at what repairs involve across Houston, see our Gate Repair team’s full service breakdown. We serve Houston and the surrounding communities with the same written-price, clean-up-photo standard on every job.
We Also Serve Cities Near Houston
Latch and Post Gate Repair Houston runs crews into Galena Park, Spring, La Porte, and Webster. If your gate sits in a subdivision along I-45 or a waterfront property near Galveston Bay, we can reach you on the same schedule as our Houston jobs. Call (361) 256-5955 and we will tell you which day works, not which week.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Houston’s clay soil expands when it gets wet, which shifts your hinge posts out of alignment and makes the gate drag or bind. The fix is resetting the post in a fresh concrete footing and realigning the gate to its original arc. Call (361) 256-5955 and we will check the post, the hinge, and the operator in one visit.
Usually yes. We grind back the rust, weld new material into the weakened sections, reinforce the hinge barrels, and repaint with rust-inhibiting primer. The original ornamental character stays intact. Most iron gate repairs in Houston run $350 to $1,800.
We install surge-protected power supplies and test the grounding on every operator we service. Houston thunderstorms can fry a control board through the electrical line even when lightning never touches your property. The surge protection is part of the repair or replacement, not an add-on.
Check whether the gate still opens on its normal cycle, whether the safety loops trip correctly, and whether the operator housing has standing water or debris inside it. If the gate jerks, hums, or will not close, call (361) 256-5955 before forcing it manually. Forcing a damaged operator often turns a $400 repair into a $2,400 replacement.
Yes. We fabricate and repair ornamental iron in styles that match the original gate’s picket profile, scrollwork, and finish. We can repair what is salvageable and replace only what is not, so the gate still looks like it belongs to the house. Estimates are free, and the price is in writing before work starts.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, leading the Cedarwell Care Promise for Houston homeowners and property owners.