Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hunters Creek Village, TX
Hunters Creek Village gate work is different because the gates themselves are different: heavy custom steel and wrought iron driveway gates on multi-acre lots, often paired with long-range intercoms and high-end access controls. We’re Latch & Post Gate Repair, part of the Cedarwell family, and we handle that equipment with the care it demands. Houston humidity, Gulf Coast salt air, and intense summer heat all stress gate motors, bearings, and electronics here. Call (361) 256-5955 and a live person answers, day or night.
We lay drop cloths and wear shoe covers before stepping inside your home, and we name the price in writing before any work begins. That’s how we’ve worked since 2009.
Why Hunters Creek Village Homes Are Different
Hunters Creek Village is built around custom estates, most constructed since the 1960s, with ongoing teardown and rebuild activity. The gate on one of these properties isn’t a standard suburban panel. It’s often ornate steel or iron, spans a long driveway, and carries real weight. Some homes have separate pedestrian gates alongside the main driveway gate. Many include access controls tied to the home’s security or intercom system.
The climate shapes the work too. Houston’s heat drives gate operator motors to run hot, and high humidity corrodes electrical connections. And because Hunters Creek Village sits roughly 50 miles from the Gulf, we see salt-air surface rust on iron gates more than people expect. Marine-grade protective coatings are a local best practice, and we stock them. When a bearing seizes or a control board shorts here, it’s usually weather’s doing, not age.
The village also has understated expectations. Homeowners want the gate fixed without a truck parked on the lawn, without noise, and without anyone trampling through the house. We keep our work quiet and our footprint small.
Styles & brands we work with
Our Main Hunters Creek Village Services
Most Hunters Creek Village calls come down to two things: a gate that won’t move properly, and a gate that needs replacing or building from scratch. Below is a quick route to each service page for Hunters Creek Village.
Gate Repair in Hunters Creek Village
When a heavy estate gate won’t open, drags, or sags, the fix usually lives in the hinges, the latch, the post, or the operator. On Hunters Creek Village properties, we often find corrosion inside the post or a welded joint that’s cracked under the gate’s own weight. We diagnose it on-site, name the exact price before work, and repair what’s actually failing. You’ll see the full breakdown on the Gate Repair in Hunters Creek Village page.
Gate Installation in Hunters Creek Village
New installations here often mean matching an ornamental iron or steel gate to a home’s existing architecture, then setting posts deep enough for Houston soil and drainage. We take measurements, walk you through materials and automation options, and give a written price before any digging starts. If you’re planning a rebuild or adding a driveway gate, the details are on our Gate Installation in Hunters Creek Village page.
Electric Gate Repair in Hunters Creek Village
Automation on a Hunters Creek Village gate means motors, control boards, safety sensors, and keypads that must all talk to each other. When humidity gets into a board or a gate this heavy overheats its operator, the failure is rarely obvious. We carry parts for the brands families actually have and fix the root cause, not the symptom. See the full scope on our Electric Gate Repair in Hunters Creek Village page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hunters Creek Village
We service the brands most common on Hunters Creek Village estates: LiftMaster, FAAC, BFT, and Linear. We stock common boards, remotes, receivers, and safety edges locally, which shortens the wait on most repairs here. Full details are on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hunters Creek Village, TX
| Service | Typical range in Hunters Creek Village |
|---|---|
| Standard gate-latch replacement | $180 – $340 |
| Gate hinge replacement or adjustment | $220 – $450 |
| Post realignment or reinforcement | $450 – $900 |
| Gate operator replacement (chain or belt drive) | $850 – $1,600 |
| Control board replacement | $350 – $800 |
| Safety sensor replacement or realignment | $250 – $500 |
| Keypad or card-reader replacement | $300 – $700 |
| Full system diagnostic and tune-up | $120 – $250 |
| Marine-grade protective coating application | $500 – $1,200 |
| Heavy ornamental gate installation (materials not included) | $2,500 – $6,000 |
In Hunters Creek Village, price moves with gate weight, ornamentation, and how far the power or intercom wiring has to run. Custom finishes and marine-grade coatings also add to the total. You’ll always see the exact number in writing before we start.
Neighborhoods We Serve in Hunters Creek Village
We work throughout Hunters Creek Village, from the bayou-front properties to the interior estate streets off Post Oak and Voss. We know the neighborhood layouts and how driveway grades and drainage patterns affect gate posts.
- The estates along Inwood Drive and Hunters Creek
- Bayou-front properties off Buffalo Bayou’s north bank
- The custom homes near Kinkaid School and Memorial Drive
- The larger lots south of Piney Point Road
- Teardown-and-rebuild sites across the village
For most repairs, we can reach Hunters Creek Village addresses quickly once we’ve dispatched a technician from the metro office. We’ll tell you the window when you call.
Service Area – Cities Near Hunters Creek Village
Beyond Hunters Creek Village, we serve communities across the Houston metro. You can read more about our work in Houston, TX, The Woodlands, TX, Sugar Land, TX, and Spring, TX. If you’re on the edge of Hunters Creek Village and your street straddles a neighboring service area, call and we’ll confirm coverage.
Serving Hunters Creek Village, TX - Our Local Coverage Area
We’re based in the Hunters Creek Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hunters Creek Village
Most non-emergency gate repairs in Hunters Creek Village happen within a day or two of your call, and we can often schedule the same week. For urgent failures like a gate stuck open or a keypad that won’t accept codes, we dispatch as soon as a technician is available nearby. Call (361) 256-5955 and we’ll give you a straight answer on timing.
Some Hunters Creek Village properties fall under deed restrictions that shape gate height, materials, or finish, especially in the teardown-and-rebuild areas. We don’t handle HOA paperwork, but we can build to the standards you’ll need and provide specs. We’ll ask what your restrictions require before we quote.
Yes. On Hunters Creek Village ornamental iron and steel, we match finishes as closely as the original material allows, using marine-grade coatings where salt air is a factor. For refinished gates that sit near the street, we’ll show you samples before we commit. Call (361) 256-5955 for an exact quote, estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hunters Creek Village Customers Say
"Electric gate was sticking. He oiled and adjusted the track, wiped everything down after, and left no grease anywhere. Quiet, kind, and quick."
- Carlene Fuchs"The gate screeched and dragged. They fixed the track and oiled it, and wiped down everything after so there was no mess. Quiet and kind, in and out without any fuss."
- Opal Reddick"Installed a new gate motor and remotes. Respectful crew, protected the driveway, and cleaned up every bit of welding debris. Walked me through the new setup patiently."
- Nick Farrow