Lock Repair in Houston, TX

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Lock Repair in Houston, TX

A gate lock that won’t catch, a latch that sticks, a keypad that stopped reading codes – these are the moments a gate stops being a gate and becomes a daily frustration. Lock repair in Houston means getting the latch, cylinder, or electronic lock working again so your gate actually closes, stays closed, and opens when you need it to. At Latch and Post Gate Repair Houston, every call is answered by a live person around the clock, and every repair comes with a written price before we touch a thing. If you’re dealing with a lock that’s fighting you, call (361) 256-5955 and we’ll walk you through what’s likely going on before we ever schedule a visit. You can also see more about how lock work fits into the broader scope of what we do on our Gate Repair in Houston page.

Locks fail for reasons you can usually feel before you can see. Houston’s humidity works its way into cylinders and latches over time, and the fine silt that blows through neighborhoods like The Heights, Meyerland, and Kingwood settles into moving parts. Latch and Post has been part of the Cedarwell family of gate repair specialists since 2009, and we’ve seen enough Houston lock failures to know that a stuck lock on a Tuesday usually means a stuck lock on Saturday unless someone addresses the cause, not just the symptom.

Key Takeaways

• Most lock repairs in Houston run between $85 and $240 depending on whether it’s a simple latch adjustment or an electronic lock replacement.
• We service LiftMaster, FAAC, BFT, and Linear gate locks; a written price comes before any work begins.
• Every visit includes shoe covers, drop cloths, and a cleanup photo before we leave.
• All work is backed by the 365-Day Done Right Promise.
• Call (361) 256-5955 any hour; a live person answers, not a voicemail tree.

When You Need Lock Repair

You’ll usually know before the lock gives up entirely. A slowing keypad, a latch that needs to be lifted instead of just pushed, a deadbolt that grinds midway. These are the warnings. Here are the scenarios Houston homeowners bring to us most often:

• The gate won’t stay latched. You close it, it bounces back open. The strike plate has likely shifted, or the latch itself is worn. We see this constantly in older Memorial and Bellaire homes where gates have been hanging for 15 or more years.
• The key turns but nothing happens. This is almost always a cylinder issue – worn pins, a broken tailpiece, or debris inside the cylinder. Houston’s humidity accelerates the corrosion that causes it.
• The keypad or electronic lock stopped reading codes. We get calls from Katy, Cypress, and Sugar Land regularly where a LiftMaster or Linear keypad works intermittently, then not at all. It’s usually the keypad connection or the control board, not the lock body itself.
• The lock is stiff and getting stiffer. Dirt, silt, and humidity have packed themselves into the mechanism. Left alone, it gets worse until the key snaps or the latch seizes while the gate is open.
• The gate locks but won’t unlock from inside. This is a safety concern, especially for families with kids and dogs. The interior release mechanism has failed or jammed.
• Someone forced the gate and the lock took damage. After a break-in attempt or just a very determined visitor, the lock body or strike can be bent. The lock may still work today and fail completely next week.

If any of these sound like your gate, call (361) 256-5955. We’ll ask what you’re seeing and hearing, and we’ll give you a straight answer about whether it’s a repair visit or something we can diagnose right there on the phone.

Our Lock Repair Process

Every lock repair follows the same calm, careful sequence. No surprises, no mess left behind, no guesswork on price.

1. We listen first. When you call, a live person answers and asks what the lock is doing – when it started, what it sounds like, whether it’s fully failed or just getting worse. We ask what brand the lock is and whether it’s mechanical or electronic.
2. We arrive with a plan and a written price. Before a single screw is removed, you get the repair cost in writing. Not an estimate range, not a verbal ballpark – a written number you can look at on paper or on a screen. If you don’t want to proceed, we leave. No charge, no pressure.
3. We protect the space around the gate. If the lock is on a gate attached to or near your home, we put on shoe covers before stepping inside any interior space. Drop cloths go down wherever tools might touch the floor. This is the Cedarwell C.A.R.E. routine, and it’s how we’d treat our own homes.
4. We repair the lock and test it repeatedly. Depending on the brand and the failure, we may replace the latch assembly, rebuild the cylinder, clean and re-lubricate the mechanism, or replace the electronic lock unit. We test the gate through at least a dozen open-and-close cycles while we’re there, watching for binding, misalignment, or strain.
5. We leave a photo of the clean-up. Before we pull out of the driveway, you get a photo showing the area as we found it – floors clean, no debris, everything put back where it was. We ask before we move anything, and we explain what we’re doing as we go.

Every lock repair is covered by the 365-Day Done Right Promise. If the repair isn’t holding up, we come back and make it right. No argument, no fine print – that’s the Cedarwell family way.

Lock Repair Pricing in Houston

Lock repair in Houston typically falls between $85 and $240 for most common failures. The final number depends on the type of lock, how it’s failed, and the brand. Here’s a closer look at what drives cost:

What moves the number? The brand matters. A LiftMaster lock integrates with a LiftMaster operator, which usually means a faster swap. A BFT or FAAC lock on a European-style gate might take a bit longer to source parts for – but we’ll tell you that upfront, in writing, before you commit. Houston’s salty, humid air near places like Clear Lake and Galveston Bay also accelerates corrosion, which can add labor time if fasteners need careful extraction or weld & rust repair.

One thing never changes: the written price comes before the work. We don’t start a job and then “discover” additional charges. If we see something that changes the scope, we stop and tell you. You decide. Estimates are free – call (361) 256-5955 and we’ll give you a clear, honest range for your specific lock.

FAQs – Lock Repair

How much does gate lock repair cost in Houston?

Most gate lock repairs in Houston fall between $85 and $240, with electronic lock replacement running higher at $300 and up depending on the brand and integration. The exact price for your lock is always presented in writing before any work starts. Call (361) 256-5955 for a free estimate on your specific setup.

Can you repair my gate lock the same day?

We answer calls around the clock with a live person, and most lock repairs can be scheduled within the same day or next day. Availability depends on the neighborhood and the schedule that day; call (361) 256-5955 and we’ll tell you exactly when a uniformed technician can be there.

What brands of gate locks do you work on?

We’re factory-trained on LiftMaster, FAAC, BFT, and Linear gate locks, among others. If your lock uses a keypad, remote, or intercom tied to an automatic gate operator, we can usually diagnose and repair it. Tell us the brand when you call and we’ll confirm parts availability before scheduling.

Is it cheaper to repair or replace a gate lock?

Repair is almost always cheaper when the lock body is intact and the failure is mechanical, like a shifted strike plate, a gate realignment issue, or a clogged cylinder. Replacement becomes the better call when the electronic components have failed or corrosion has compromised the housing. We’ll show you both numbers in writing and let you choose without any pressure. Call (361) 256-5955 to get a straight answer on your lock.

Will the repair leave a mess or chemical smells?

No. We wear shoe covers and lay drop cloths wherever we work, and we use pet-safe lubricants where there’s a choice. If you have sleeping kids or a nervous dog, we can schedule around quiet hours – just mention it when you call. Every visit ends with a photo of the clean-up before we leave.

Call Latch and Post Gate Repair Houston

Every gate comes down to two parts – the latch that holds it and the post that carries it. That’s the job we focus on, and lock repair is where we see families feel the most relief. The gate closes. The key turns. The keypad lights up. The dog stays in the yard. The kids stay safe behind the fence. When the lock works, everything else works.

Lock repair for your Houston home starts with a call to (361) 256-5955. A live person answers, day or night. Written price before any work. Shoe covers, drop cloths, cleanup photo. 365-Day Done Right Promise. We’ve been doing it this way since 2009, and we’re not about to change.

Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston.