Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Houston
Gate installation in Houston usually costs between $2,800 and $9,500 depending on the gate type, operator, and what’s already in the ground. Most Houston jobs run $3,500 to $6,500 for a standard driveway gate with automation. If you’re in Houston and the gate on your property was never automated, or the builder-grade opener finally quit, call us at (361) 256-5955 and we’ll give you a written price before any work starts.
We know Houston’s streets, not just from a map. Our techs drive the same feeder roads you do, from Westpark Tollway to Beltway 8, and we understand what the humidity, the clay soil, and the summer lightning do to a gate over time. That’s why a Houston gate installation done right looks different from a generic one: post footings sized for expansive clay, conduit buried below the grade that floods in August, and surge protection already in place. Dispatch and scheduling are coordinated from our Houston office, and crews serve Houston locally, so when you call, the person on the other end knows this city.
Why Latch and Post Gate Repair Houston Is Houston’s Preferred Gate Installation Company
Houston homeowners call us because we do one thing and we do it carefully. Latch & Post Gate Repair is a Cedarwell-family gate specialist, not a handyman with a truck and a welder. We focus on gate repair, gate installation, and electric gate repair. That narrow focus means our Houston techs have seen the same builder-grade LiftMaster failures in Cinco Ranch, the same shifting post footings in Pearland, and the same corroded hinge welds in Spring that you’re dealing with right now.
Every visit to your Houston home follows the same documented routine. A written price comes before any work begins, every single time. Our technician puts on shoe covers and lays drop cloths before stepping inside, because your floors matter as much as the gate itself. Before we leave, you get a photo of the cleanup. That’s the Cedarwell C.A.R.E. standard: Clean up like it’s our own home. Ask before we move or touch anything. Respect your family’s time and quiet hours. Explain the price before the work. Cody Beckman runs our Houston operation with that standard on every job.
Our Houston customers call this out in reviews more than anything else: the tech knocked before touching the gate, the price matched the quote exactly, and the crew left the driveway cleaner than they found it. That’s what gets us repeat work and referrals across this city.
Styles & brands we work with
Electric Gate Installation in Houston
Electric Gate Installation in Houston means adding an operator, power supply, safety devices, and access controls to a manual gate, or replacing a failed operator on an existing automated gate. The Houston part matters: our market runs heavy on LiftMaster, FAAC, BFT, and Linear operators, and our techs are factory-trained on exactly those brands. We pull permits where your HOA or municipality requires them, run conduit properly, and wire the system so that a summer thunderstorm doesn’t kill the board.
A typical electric gate installation in Houston runs $2,800 – $6,500 for the complete job, including operator, mounting, wiring, keypad or remote entry, and safety photocells. Retrofit jobs on older iron gates in the Heights or Garden Oaks tend toward the lower end. New suburban installs in master-planned communities with long runs and concrete work land higher.
What the installation includes
We run dedicated power from your panel or subpanel to the operator location. We set a proper post pad or steel frame at the right elevation for drainage. Safety photocells go in at the correct height for pets and children, and we test the auto-reverse in both directions before we call the job done.
Why the wiring matters in Houston
Houston’s clay soil moves, and Houston’s rain soaks deep. We bury schedule 80 conduit below the frost line and grade, not the shallow schedule 40 that builder crews sometimes throw in. We also install surge protection at the operator by default. Without it, the first July lightning strike can take out a control board, and a board replacement in Houston runs $650 – $1,100 before labor. Spending $80 on surge protection at install is the cheapest insurance on the property.
Driveway Gate Installation in Houston
Driveway Gate Installation in Houston is the most common job on our Houston board, and it rarely means just hanging a gate and calling it done. It means setting hinge posts or roller rails on footings that will survive wet-dry clay cycles, running power where it needs to go, mounting the operator, aligning the gate to swing or slide true, and programming entry. A new driveway gate fully installed in Houston typically runs $3,200 – $9,500, with most single swing gates landing around $4,000 – $6,500 including automation. You’ll see the exact figure in writing before we touch anything.
New builds and recent builds
Lots of Houston homes in Cinco Ranch, Bridgeland, Sienna, and the new corridors off the Grand Parkway came with a gate from the builder. Most were installed by the fencing contractor, not a gate specialist. We see operators running on 16-gauge wire with no surge protection, post footings poured less than 24 inches deep, and conduit that got crushed during landscaping. We fix all of it.
Retrofitting manual gates
In older Houston neighborhoods like Garden Oaks, Timbergrove, or Meyerland, the original driveway gate is often beautiful ornamental iron that’s been manual since the house was built. We add LiftMaster or FAAC operators to those gates routinely. The job requires trenching for power and safety photocell conduit, and we do that with your HOA’s rules in mind, not against them.
Trusted Brands We Service in Houston
Our Houston techs carry repair stock for LiftMaster, FAAC, BFT, and Linear, which covers the majority of what’s installed across this metro. LiftMaster dominates residential in the suburban HOA communities from Katy to Pearland. FAAC and BFT show up on heavier iron gates in older loop neighborhoods and commercial properties. We don’t push one brand for every job. We match the operator to the gate weight, the post condition, and the way a Houston family actually uses the driveway: school runs at 7 a.m., package deliveries, trash days, dog walks. If your existing operator failed, we can usually swap it same week with parts from our Houston stock, not a three-week backorder.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Houston Homes
- Builder-grade operators failing within two years. In Cinco Ranch and Bridgeland, original LiftMaster operators on 2018-2020 gates often run on 16-gauge wire and no surge protection. Summer lightning takes out the control board, and the gate won’t open at all until we re-pull proper wire.
- Manual gates converted to automatic without real power runs. If a previous contractor added a motor by running low-voltage wire along the driveway edge, Houston rain will short that line within a season or two. The gate either stops responding or reverses erratically. The fix is trenching and proper conduit.
- Shallow post footings in expansive clay soil. Houston’s clay swells when it’s wet and shrinks when it’s dry. A hinge post set in a shallow footing moves half an inch out of plumb, and then the gate sags, drags, or won’t latch. We re-set the footing deeper, let it cure, and only then mount the operator.
- No room left for the operator arm on a tight driveway. In older inner-loop neighborhoods like the Heights or Montrose, the iron gate post sits close to a brick wall or a tree. If the original installer didn’t account for operator clearance, the arm strikes the wall or the gate won’t open to 90 degrees. We solve this with rear-mount arms, slide conversions, or post relocation.
Pricing for Gate Installation in Houston, TX
Here’s what Houston families should expect to pay for the most common installations. A single swing driveway gate with automation runs $3,500 – $6,500. A double swing gate on a wider driveway runs $5,000 – $9,500. A sliding gate for a longer set-back or an industrial lot near the Port of Houston runs $4,800 – $9,500. Adding automation and safety edges to an existing manual pedestrian gate runs $1,800 – $3,200. A basic pedestrian gate with keypad runs $1,400 – $2,800. The main variables are gate weight, concrete work, wire run length, and operator brand. Every one of these prices gets quoted in writing before we start, and that written number is the number you pay. Call (361) 256-5955 for an exact quote on your gate.
We Also Serve Cities Near Houston
Our Houston office runs crews into Gate Installation in Houston neighborhoods across the metro daily, and we serve the surrounding communities where the job demands: Galena Park, Spring, La Porte, and Webster. If you’re in any of these areas, the same Cedarwell C.A.R.E. routine applies. For the full scope of what our Gate Installation service covers across this region, give us a call.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Houston
Because the builder installed the original operator with lightweight 16-gauge wire and no surge protection, and Katy storms send lightning across the flat open terrain without much resistance. The surge travels through the low-voltage line, hits the control board, and the board fails. The permanent fix is re-pulling 12-gauge wire in schedule 80 conduit and adding a surge protector at the operator. We do this regularly in Katy, Cinco Ranch, and Bridgeland. Call (361) 256-5955 for a quote.
A loop detector is installed in the driveway pavement and tells the gate to open when a car sits on it, which most Houston homeowners don’t need. A keypad plus remotes and safety photocells is the standard setup for residential driveways here. If you want the gate to open automatically for exiting cars without pressing anything, we add an exit loop detector during installation. A loop detector adds roughly $600 – $1,000 depending on the driveway surface and saw-cut work.
Yes, and this is one of the jobs we do most in the Heights and Timbergrove. The gate has to be structurally sound, the hinge posts need to be plumb, and we need room to run conduit for power and safety photocells. Most 1990s ornamental iron gates in Houston weigh enough that a LiftMaster or FAAC swing operator handles them well. A full retrofit with operator, keypad, remotes, and safety devices usually runs $3,500 – $5,500 in that area.
For a heavy slide gate near the Port of Houston, we typically recommend a BFT or FAAC industrial slide operator with a heavy-duty gear rack and a hard-wired loop detection system. These operators are built for frequent cycling, which matters when trucks pass through dozens of times a day. The full installation with operator, rack, concrete pad, loops, and access controls runs $6,000 – $12,000 depending on gate length and cycle count.
We set hinge posts and operator pads on deeper footings than code minimums, because Houston’s expansive clay heaves and shrinks through every wet-dry cycle. For a swing gate, we pour footings 30 to 36 inches deep and let them cure before hanging the gate. For a slide gate, we pour a full-length track pad with proper drainage so water doesn’t pool under the rollers. A shallow footing is the number one reason Houston gates start dragging within two years, and we build to avoid exactly that.
Written by Cody Beckman, Owner at Latch and Post Gate Repair Houston, serving Houston since 2009.