Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pecan Grove
Gate repair in Pecan Grove usually means one of two things: a driveway gate that won’t open on your way to work, or an entry gate that won’t close behind you. Either way, you want a technician who knows the difference between a tired battery and a failed control board before he starts unbolting anything. Our Gate Repair crews work across Pecan Grove every week, and they’re trained on the LiftMaster, FAAC, BFT, and Linear operators this neighborhood actually has. Call (361) 256-5955 and a live person answers, day or night. We’ll give you a written price before any work starts, and we’ll tell you honestly if the gate is worth fixing or if you’re better off replacing it.
Why Latch and Post Gate Repair Houston Is Pecan Grove’s Preferred Gate Repair Company
This is a master-planned community with HOA-managed entrances, custom iron gates, and driveways long enough that a dead operator isn’t a minor inconvenience. It’s a security gap and a morning commute problem. We’ve repaired hundreds of gates in Pecan Grove over the years, from simple latch replacements on pedestrian gates to full operator retrofits on heavy steel sliders. Cody Beckman built our reputation on showing up when promised, quoting honestly in writing, and leaving the job site cleaner than we found it.
Our technicians carry shoe covers and drop cloths on every visit. If the gate is attached to your home or near your front walk, your floors and landscaping stay protected. We also operate by the Cedarwell C.A.R.E. values: Clean up like it’s our own home, Ask before we move or touch anything, Respect your time and quiet hours, Explain the price before the work. Families here with kids and pets shouldn’t have to choose between a working gate and a tidy house.
Dispatch and scheduling for our Pecan Grove crews are coordinated from our Houston office, which keeps response times short without compromising the careful, documented work we’re known for. Every repair and installation is covered by our 365-Day Done Right Promise. If it’s not right, we make it right. No argument, no fine print.
Styles & brands we work with
Sliding Gate Repair in Pecan Grove
Sliding gate repair in Pecan Grove often comes down to one thing: the soil under the posts. This part of Fort Bend County sits on flat, clay-heavy ground that swells after rain and shrinks during dry spells. Over time, that movement cracks post footings and knocks the gate track out of level. The gate still runs, but it grinds, shudders, and eventually stalls halfway open. A typical sliding gate repair in Pecan Grove runs $225 – $640, depending on whether we’re replacing rollers, re-leveling the track, welding a cracked frame, or resetting a shifted post. You’ll see the exact number in writing before we touch anything.
Track and roller service on heavy steel gates
Most sliding gates in Pecan Grove are custom steel or ornamental iron, and on 1980s brick homes, the bottom rail takes decades of humidity and occasional flooding. Rust builds, the rollers wear unevenly, and the gate starts to drag. We replace rollers, clean and re-bed the track, and treat the rail so it runs smooth again. If the post footing has cracked, we address that too; otherwise you’ll be back in the same spot in eighteen months.
Operator alignment and safety eyes
When a slide gate slams or reverses for no reason, the operator arm and the safety photocells are usually fighting each other. We check both, re-align the photo eyes to meet UL 325 entrapment standards, and confirm the opener’s force settings are correct for the gate’s actual weight. Quiet tools are available if there’s a sleeping kid in the house; just tell us when you call.
Wrought Iron Gate Repair in Pecan Grove
Wrought iron gate repair in Pecan Grove typically means rust repair, hinge replacement, or correcting a drop at the latch edge. High humidity and the occasional flood sheeting across flat lots push moisture into the bottom rail and hinge post, and over time the panel sags and binds. The average wrought iron repair here runs $180 – $520 for hinge rebuilds, latch fixes, and localized rust treatment, with full re-welding and repainting of a large double gate landing closer to $700 – $1,300. We’ll quote it clearly before starting.
Hinge and post correction on sagging panels
The hinge post is the primary connection point that holds the gate’s weight. Our crew was called to a home on Plantation Drive where a Viking swing gate had sagged enough to drag on the driveway. We found the hinge post had shifted in the clay soil, cracked the concrete footing, and pulled the gate operator’s arm out of alignment. We re-set the post with a deeper, reinforced footing, replaced the worn rack and pinion, and re-aligned the safety photocells so the HOA’s required entrapment protection tested clean.
Rust treatment that actually lasts here
Surface rust on an iron gate is one thing. Rust that has eaten through the bottom rail is another. If the metal is still sound, we grind it back, treat it, prime it, and match the paint or powder coat closely enough to satisfy a picky HOA. If the rail is compromised, we’ll tell you repair is a temporary fix and help you price a replacement panel instead. Being straight about that is part of the job.
Trusted Brands We Service in Pecan Grove
We’re factory-trained on the brands Pecan Grove homes actually have installed: LiftMaster, FAAC, BFT, and Linear among them. That matters because a lift from a swing-gate repair on a Viking or Mighty Mule isn’t the same job as a slide-gate repair on a FAAC, and guessing wastes your morning and your money. We keep common control boards, remotes, and safety eyes stocked for fast turnaround across Pecan Grove, so the right part is often in the truck on the first visit.
Common Gate Repair Problems We See in Pecan Grove Homes
- Clay-driven post lean: The flat terrain and expansive clay soils here shift gate posts more aggressively than in neighboring Sugar Land. A gate that scrapes the driveway today was probably level last spring; the post didn’t move, the soil did.
- Loop detectors failing after heavy rain: We get calls the morning after a big Fort Bend storm. Loop detectors short out when water pools, and the gate refuses to open for the car leaving for work. That’s an operator-level electrical repair, not just a remote battery.
- Legacy operators without current entrapment protection: Some Pecan Grove homes still run operators installed before modern UL 325 requirements existed. They work right up until they don’t, and when they fail they fail hard. We can often retrofit, but if the board is obsolete, replacement is the cheaper decision.
- HOA-compliant hardware matching: Because many gates sit at HOA-managed entrances or driveways, the repair often has to match existing ironwork, paint color, and hardware style. We’re used to that conversation and we carry the finishes that keep the architectural review committee happy.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Pecan Grove, TX
Gate repair pricing in Pecan Grove is straightforward once you know what’s actually broken. A service call to diagnose the gate runs $89 – $149, and that charge is waived when you approve the repair. Standard latch and hinge repairs run $180 – $520. Operator replacement, depending on brand and gate weight, runs $850 – $2,400 installed. Full custom gate installation, when repair no longer makes sense, starts around $2,500 for a single driveway swing gate and goes up with ironwork detail, automation, and pedestrian access. Every job gets a written, line-item price before work begins, and the price we quote is the price you pay. Estimates are free; call (361) 256-5955.
We Also Serve Cities Near Pecan Grove
If your gate sits just outside Pecan Grove, our crews also cover Houston, The Woodlands, Sugar Land, and Spring. Same written pricing, same C.A.R.E. cleanup routine, same 365-Day Done Right Promise on every job, no matter which side of the Fort Bend county line you’re on.
Serving Pecan Grove, TX - Our Local Coverage Area
We’re based in the Pecan Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pecan Grove
The soil under Pecan Grove is clay-heavy and expansive. It absorbs water during the humid season and heavy rains, then contracts during dry weeks. That cycle pushes against the concrete footing underneath gate posts, and after enough seasons the post tips. The fix is re-setting the post in a deeper, reinforced footing, and that’s a repair we perform regularly here. If your gate is scraping or the latch no longer aligns, call (361) 256-5955 and we’ll come measure the lean and give you a written price to correct it.
It depends on the board and the safety package. If we can still source the control board and the operator meets current entrapment protection standards, we’ll repair it and stand behind the work with our 365-Day Done Right Promise. If the board is obsolete or the operator predates UL 325 requirements, repair often costs more than a new operator installed, and we’ll show you both numbers in writing before you decide.
Many Pecan Grove HOAs require repairs to match the original gate design, hardware finish, and paint color, and some require entrapment protection to be tested after any operator work. We work with those guidelines every week and can document exactly what was done if your HOA needs proof. When you call, let us know the subdivision; it helps us come prepared.
A hinge and latch repair on a standard wrought iron or steel driveway gate in Pecan Grove usually takes 2 – 4 hours on site. A post re-set with a new concrete footing and cure time can run a couple of days because the footing has to harden before the gate goes back on. We tell you the honest timeline before we start, and we’ll put it in the written estimate.
After a strong Pecan Grove rain, the usual culprit is water in the loop detector or a short in the operator’s low-voltage wiring. Sometimes it’s as simple as a stretched limit switch. This is not a fix we recommend doing yourself; gate operators carry high-tension springs and electrical components that can injure someone who isn’t trained. Call (361) 256-5955 and a live person will get a technician out. We diagnose first, quote in writing, then repair with your approval.
Get Your Pecan Grove Gate Fixed Right
Older gates and legacy operators around Pecan Grove don’t fail politely. They fail on a Monday morning, or when it’s raining, or when you’re already late. Our crews know this neighborhood’s HOA requirements, its clay soil, and its custom ironwork. One call to (361) 256-5955 gets you a live person, a straight answer, and a written price before we turn a single bolt. We lay drop cloths, we wear shoe covers, and we send a photo of the cleanup before we leave. Your floors stay clean, your kids stay asleep, and your gate closes behind us.
Written by Cody Beckman, owner of Latch and Post Gate Repair, serving Pecan Grove homeowners and HOAs with honest pricing and careful work.